Overview
LICHEN LC-OES-150FR powerbasic stirrer is suitable for mixing and stirring of low, medium and high viscosity liquids in the laboratory. The stirring host adopts high-quality engineering plastic body, which runs stably; the output end applies a variable speed booster to improve the output torque; the running Rotation speed can be arbitrarily set, and the digital display is intuitive to ensure data collection. It has built-in soft start, automatic overload protection, and full constant power compensation.
Features
1, LCD display Rotation speed and actual Rotation speed, intuitive and clear;
2. It can realize positive and reverse stirring, stop rotating in the middle of positive and reverse, and start slowly;
3. DC brushless motor, low noise, maintenance-free, smooth operation.
4. Rotation speed can automatically adjust torque according to the change of sample viscosity.
5, adjustable stirringrod chuck, easy loading and unloading;
6. Stable start-up to effectively prevent sample overflow.
7. Automatically memorize the set working parameters.
Principle
The powerbasic stirrer is driven by a brushless DC motor, combined with a variable speed booster mechanism, to transfer power to the stirringrod. The device can work according to the set Rotation speed, and automatically adjust the torque according to the change of liquid viscosity during operation to maintain a constant Rotation speed to achieve stable stirring.
Applications
Laboratory liquid mixing and stirring
Steps
1. Install the stirringrod to the adjustable chuck and fasten it;
2. Connect the power supply.
3. Rotation speed, steering and timing parameters are set through the control panel.
4. Start the device, and Stirrer will start running slowly.
5. After running, turn off the power and remove the stirringrod.
Notice
• Power supply voltage in the range of AC100-240V 50/60Hz.
Processing capacity does not exceed 30L and maximum viscosity does not exceed 50000mPa.s.
• Pay attention to observe when starting to prevent the sample from overflowing due to intense stirring.
• Make sure the equipment is powered off when loading and unloading the stirringrod.
• The equipment has an automatic overload protection function. In case of abnormal shutdown, please check the load condition.
• Regularly clean the equipment and keep it drying.
