Please contact customer service
Processing torque up to 40N.cm, can handle up to 10000mpa.s viscosity samples. Brushless motor to prevent pollution, with smooth start, overload protection and sample temperature monitoring functions, low noise operation.
Category : Laboratory Mixer
Brand : HuXi
SKU : NB050562
Service :The delivery and service By NBCLab.Com
HUXI RWD50AS overhead powerbasic stirrer is an overhead stirrer with program control and large LCD Touchscreen. It adopts self-locking chuck, Rotation speed and time adjustable, suitable for solid-liquid, liquid-liquid or medium and high viscosity sample mixing, mainly used in scientific research, chemical industry, petrochemical, cosmetics, food, biology and other fields.
1. Use a brushless motor to avoid Toner contamination of the sample. 2. The mixing capacity is strong and stable, and the processing torque is as high as 40N.cm. 3. Equipped with 4.3-inch LCD capacitive Touchscreen, intuitive operation, easy to operate with gloves. 4. With screen lock function to prevent misoperation. 5. Clear digital display for easy speed control and recording. 6. It has a gentle start function to effectively prevent the sample medium from splashing out. 7. Adopt a convenient Impeller chuck, no tools are required to replace the Impeller, and there is no risk of key loss. 8. There is an audio prompt after the chuck is installed in place to avoid installation misalignment. 9. Use corrosion-resistant plastic chuck to effectively avoid organic solvent corrosion. 10. Configure the Impeller penetration hole to adjust the installation position of the stirring rod. 11. Motor and ventilator design optimization, significantly reduce operating noise, improve service life. 12. The microelectronic processor is used to ensure that the stirring speed is continuously stable and is not affected by the change of material viscosity. 13. With overload protection function, the circuit is automatically cut off and alarmed when abnormal. 14. Using double support rods to fix the main engine and double chucks to fix the clip, the machine is more stable and firm.
The device controls the brushless motor through a microelectronic processor, drives the Impeller to swirl/spin, and realizes mixing and stirring of the sample. The processor can ensure the continuous stable output of Rotation speed, and can automatically run according to the preset program (including Rotation speed, time, forward and reverse rotation). The device has the function of torque change trend display and sample temperature monitoring protection.
Scientific research, chemical industry, petrochemical industry, cosmetics, food, biology
Protection Rating: IP42
1. According to the Sample type and container, adjust the installation position of the stirring rod through the Impeller penetration hole. 2. Insert the Impeller into the self-locking chuck and hear the prompt tone to indicate that it is installed in place. 3. Set the required Rotation speed, time and forward and reverse program on the 4.3 inch LCD capacitive Touchscreen. 4. Start the equipment, and the equipment will be stirred according to the set parameters. 5. After the operation, the equipment automatically stops, and the Impeller can be removed for cleaning.
• Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) and relative humidity (80%). • Pay attention to the sample temperature protection setting to avoid the sample temperature exceeding the set upper limit (-160~ 600 ° C). • The equipment has an overload protection function. If there is an alarm, please check the load and troubleshoot before using it. • When replacing the Impeller, make sure the chuck is installed in place and hear the prompt tone. • Use corrosion resistant chucks to treat organic solvent samples. • Do not touch the swirl/spin parts when the device is running. Before cleaning the equipment, be sure to disconnect the power supply.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
