Please contact customer service
Processing torque up to 80N.cm, can meet the vast majority of routine experimental needs. Brushless motor to prevent sample contamination, with program control, overload protection and sample temperature monitoring functions, stable operation and low noise.
Category : Laboratory Mixer
Brand : HuXi
SKU : NB050564
Service :The delivery and service By NBCLab.Com
HUXI RWD150AS overhead powerbasic stirrer is a programmable overhead stirrer with large LCD Touchscreen. It features a self-locking chuck with adjustable Rotation speed and time for solid-liquid, liquid-liquid or medium to high viscosity mixing tasks.
1. Use a brushless motor to avoid Toner contamination of the sample. 2. Stirring treatment torque up to 80N.cm, strong and stable capacity. 3. Equipped with 4.3-inch LCD capacitive Touchscreen, the operation is intuitive, easy to use with gloves, and has a screen lock function. 4. Equipped with a gentle start function to prevent the sample from splashing out. 5. Adopt convenient self-locking Impeller chuck, no tools are required for replacement, there is a sound prompt when installed in place, and the chuck is resistant to corrosion. 6. Impeller penetration hole is designed for easy adjustment of the stirring rod position. 7. Motor and ventilator design optimization, low noise, long life. 8. Using microelectronic processor to ensure stable Rotation speed, not affected by material viscosity. 9. With overload protection function, the circuit is automatically cut off and alarmed when abnormal. 10. It is fixed with double support rods and double chucks, resulting in a stable structure. 11. Support program control, 3 program settings (Rotation speed, time, forward and reverse) can be performed. 12. With torque trend display and sample temperature protection function. 13. Provide Type-C and RS485 software interfaces to support remote control and data management.
The device uses an overhead electric motor to drive the Impeller swirl/spin to mix and stir the samples in the container. Its microelectronic processor can precisely control the motor Rotation speed to ensure a stable output speed under different viscosity conditions. The program control function allows the user to preset multi-stage stirring parameters for automated operation.
Scientific research, chemical industry, petrochemical industry, cosmetics, food, biology
Protection Rating IP42
1. Install the main engine firmly through double support rods and collet fixing clips. 2. Install the Impeller through the self-locking chuck and hear the prompt tone to confirm that the installation is in place. 3. If you need to adjust the stirring depth, you can use the Impeller penetration hole to adjust the stirring rod position. 4. Set the required parameters on the 4.3-inch Touchscreen, such as Rotation speed, time, forward and reverse procedures, etc. 5. Start the device and its gentle start function will begin to function. 6. Rotation speed, torque trend and other information can be monitored through the screen during operation. 7. Stop stirring after the program runs or manually.
• Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) or relative humidity (80%). • Pay attention to the upper limit of the sample protection temperature set to prevent the sample from overheating. • When there is an overload, short circuit and other fault alarms, the equipment will automatically stop, please check and troubleshoot before use. • When replacing the Impeller, make sure the chuck is installed in place and hear the prompt tone to avoid misinstallation. • When using corrosion resistant chucks, it is still necessary to avoid contact with strong corrosion solvents. • Safety protection design (such as chuck protective cover, non-slip pad), please do not remove it without authorization. When performing remote control and data management, make sure to use dedicated software and connect the interface correctly.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
