$ 1042.00Ex works
Using brushless motor to prevent sample contamination, processing torque up to 100N.cm, equipped with self-locking chuck for easy replacement of Impeller, with smooth start, overload protection and sample temperature monitoring functions, low running noise.
Category : Laboratory Mixer
Brand : HuXi
SKU : NB050565
Service :The delivery and service By NBCLab.Com
HUXI RWD200AS overhead powerbasic stirrer is a programmable overhead stirrer equipped with a large size LCD Touchscreen. It uses a self-locking chuck with adjustable Rotation speed and time, suitable for mixing solid-liquid, liquid-liquid or medium and high viscosity samples. The product is mainly used in scientific research, chemical, petrochemical, cosmetic, food, biological and other fields.
1. Use a brushless motor to avoid Toner contamination of the sample. 2. The mixing capacity is strong and stable, and the maximum processing torque is as high as 100N.cm. 3. Equipped with 4.3-inch LCD capacitive Touchscreen, intuitive operation, easy to operate with gloves. 4. Equipped with screen lock function to prevent misoperation. 5. It has a gentle start function to effectively prevent the sample from splashing out. 6. Adopt a convenient self-locking Impeller chuck, no tools are required for replacement, and there is no risk of key loss. 7. There is an audio prompt when the chuck is installed in place to avoid installation misalignment. 8. The chuck is made of corrosion-resistant plastic, which effectively resists organic solvent corrosion. 9. Configure the Impeller penetration hole, which is convenient for adjusting the position of the stirring rod without adjusting the height of the main engine. 10. Motor and ventilator design optimization, low noise, long service life. 11. The use of microelectronic processors ensures that the Rotation speed is continuously stable and is not affected by changes in material viscosity. 12. Equipped with overload protection function, automatically cut off the circuit and alarm when abnormal. 13. Adopting double support rods to fix the main engine and double chuck fixing clips, the structure is more stable.
The top-mounted Stirrer is powered by a brushless motor to drive the Impeller swirl/spin. Its microelectronic processor can precisely control the motor Rotation speed, ensuring that the set stirring speed is maintained in different viscosity materials. The device can be programmed to set multi-stage Rotation speed, time and forward and reverse rotation to achieve automatic management of the sample mixing process.
Scientific research, chemical industry, petrochemical industry, cosmetics, food, biology
Protection Rating: IP42
1. Install the Impeller: Insert the Impeller into the self-locking chuck and hear the prompt tone to indicate that it is installed in place. 2. Adjust the position: Use the Impeller to penetrate the hole and adjust the stirring rod to the appropriate height. 3. Boot settings: Rotation speed, time and forward and reverse program required by 4.3 inch Touchscreen settings. 4. Start running: After confirming that the settings are correct, start the device, and the device will run according to the program. 5. Monitoring and end: Rotation speed, torque and other parameters can be monitored through the screen during operation, and the device will automatically stop after the program is over.
• Please ensure that the chuck and Impeller are firmly installed in place before use. • Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) or relative humidity (> 80%). • Set the upper limit of sample temperature protection to prevent the sample from overheating. • The equipment has overload protection. If there is an alarm, please check the load and troubleshoot before using it. • Please use the matching chuck protective cover and non-slip pad to ensure safety. When cleaning, be careful to avoid liquids from entering the equipment. • Remote control and data management require dedicated software and Type-C, RS485 interfaces.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
