$ 9755.00Ex works
Adopt High Accuracy Modular Spreader Station, all-electric control without external air source, Spreader thickness can reach a minimum of 0.01mm, maximum Spreader width of 300mm, and equipped with quick-release plastic slot for easy cleaning and maintenance.
Category : R2R Coater
Brand : HuiNuo
SKU : NB050625
Service :The delivery and service By NBCLab.Com
HuiNuo JTM-300UV/0.6 is a small continuous coater with UV UV curing technology. The equipment is a High Accuracy modular Spreader station mechanism, which adopts Modular assembly, can be separated from the winding module, the whole machine is fully electric control, no external air source is required. Suitable for continuous Spreader proofing or small-scale production of hot-melt adhesives and other materials, the colloid can be directly Spreader on heat-resistant substrates or release paper, and a curing module can be added to achieve a single top coating film.
1. High Accuracy Modular Spreader Station Structure, Modular Assembly, Modules can be added as needed. 2. Fully electric control, no external air source required. 3. Use the dial meter as the indexing head to precisely fine-tune the Spreader clearance of the upper and lower rubber wheels, and control the thickness of the Spreader. The minimum glue thickness is 0.01mm. 4. After the thickness is set, the electric push rod provides downforce to prevent the gap from changing. 5. The maximum Spreader width is 300mm (effective application width 280mm), the width is adjusted by two PEEK baffles in the plastic slot, and the unlimited length Spreader can be glued and automatically rewound. 6. Positive and reverse stepless speed change, Spreader speed 2-4.5 m/min adjustable, precision electronically controlled discharge reel can accurately adjust and continue to maintain the discharge tension. 7. Quick-release rubber groove, the upper rubber wheel and the rubber groove can be quickly disassembled and separated from the body to remove the residual glue.
The device is a continuous coater. The thickness of the adhesive layer from the Spreader to the substrate is controlled by precisely adjusting the gap between the upper and lower rubber wheels. During the Spreader process, the electronic control system precisely controls the discharge tension and Spreader speed. The material after the Spreader can be cured by UV irradiation as needed.
Spreader application of hot-melt adhesive, gel, hydrocolloid dressing, water-based glue, solvent glue and other materials
1. According to the required application width, adjust the two PEEK baffles in the plastic slot. 2. Use the dial meter to precisely fine-tune the Spreader clearance of the upper and lower rubber wheels and set the Spreader thickness. 3. Set and adjust the discharge tension and Spreader speed through the control panel knob. 4. Install the substrate and start the device for continuous Spreader. 5. After the Spreader is completed, the device automatically rewinds. 6. When the residual glue needs to be removed, the glue tank and the upper rubber wheel can be quickly disassembled for cleaning.
• The device is fully electric control, no need to connect an external air source. • When adjusting the thickness of the Spreader, precise fine-tuning is required with a dial meter. • Spreader width up to 300mm, effective application width of 280mm. • Spreader speed can be adjusted steplessly within 2-4.5 m/min. • When cleaning up the residual glue, please use the quick-release function to separate the glue tank from the upper rubber wheel from the body.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
