Product Overview
The FS-550D Servo Series Disperser is a dispersion device compatible with AC220V/50Hz voltage, equipped with a 550W motor. It supports variable frequency speed regulation from 0 to 6500rpm, ensuring precise and efficient speed adjustment. The device features a 304 stainless steel dispersion shaft measuring ø20×300mm and a large 600mm diameter dispersion disc, offering excellent corrosion resistance and outstanding dispersion performance. With a lifting stroke of 250mm and an overall height of 800mm, it balances operational flexibility and material processing efficiency.
Product Features
1. Compatible with AC220V/50HZ voltage, equipped with a 550W motor for stable power output.
2. Supports a wide frequency conversion speed range of 0-6500rpm, ensuring precise and efficient speed adjustment.
3. Features a ø20×300mm dispersion shaft and a 600mm large-diameter dispersion disc made of 304 stainless steel, offering excellent corrosion resistance and superior dispersion performance.
4. Provides a lifting stroke of 250mm, allowing flexible operation to meet various material processing needs.
5. With an overall height of 800mm, the compact design balances operational flexibility and material processing efficiency.
Working Principle
The FS-550D servo series disperser drives the dispersion shaft to rotate at high speed through a motor, which in turn moves the dispersion disc installed at the end of the shaft within the material. Through a variable frequency speed control system, the rotation speed of the dispersion disc (0-6500rpm) can be precisely controlled, generating powerful shear forces, impact forces, and turbulence to break up, mix, and homogenize material particles. The electric or manual lifting function allows adjustment of the depth of the dispersion disc in the container to accommodate the processing needs of different batches and viscosities of materials.
Application Fields
Suitable for material dispersion needs in various scenarios.
Operation Steps
1. Check if the power supply voltage of the equipment is AC220V/50HZ to ensure a safe working environment.
2. Select an appropriate dispersion disc based on the material characteristics and securely install it on the 304 stainless steel dispersion shaft.
3. Place the container with the material below the dispersion disc and adjust the disc to a suitable working depth using the electric or manual lifting function.
4. Start the equipment and gradually adjust the speed from low to the desired working speed (up to 6500 rpm) using the variable frequency speed control system.
5. Perform the dispersion operation at the set speed, and fine-tune the height of the dispersion disc as needed during the process.
6. After dispersion is complete, gradually reduce the speed until the equipment stops, raise the dispersion disc, turn off the power, and clean the equipment.
Precautions
• Before use, ensure that the power supply voltage is AC220V/50Hz and that the device is properly grounded.
• Before starting the device, always check whether the dispersion shaft and dispersion disc are securely installed to prevent detachment during high-speed rotation.
• When performing lifting operations, pay attention to the relative positions of the dispersion disc, container, and materials to avoid collisions.
• Adjust the speed smoothly to prevent sudden changes in rotation speed from causing impact to the equipment and materials.
• During equipment operation, do not place hands or other objects near rotating parts.
• After use, promptly clean the 304 stainless steel dispersion shaft and dispersion disc, keep the equipment dry, and prevent corrosion.
• Regularly inspect the tightness of all components and the electrical safety of the equipment.
