Please contact customer service
Using ultra-low power 32-bit microprocessor and 24-bit ADC data collection chip, equipped with 0.39 inch 6-bit red digital tube display, supports a variety of signal output and wireless transmission, with explosion-proof and anti-corrosion shell.
Category : Gas Detector
Brand : KORNO
SKU : NB050900
Service :The delivery and service By NBCLab.Com
The MOT300 online gas detector is an online intelligent gas detector equipped with a 0.39-inch 6-digit red digital tube display, designed using advanced VLSI technology and intelligent technology standards, and developed through a combination of digital and analog hybrid communication technologies. This instrument features advanced technology, superior performance, and high stability, with communication and self-diagnosis functions, making it easy to install and maintain. It is widely used in industries such as petroleum, chemicals, metallurgy, refining, gas transmission and distribution, and biochemistry. Compatible with various control alarms, PLCs, DCS, and other control systems, it enables remote detection, control, and alarm functions, as well as data storage and analysis capabilities.
1. Ultra-low-power 32-bit microprocessor using new semiconductor nano-process technology, with a 24-bit ADC data acquisition chip. 2. Equipped with a 0.39-inch 6-digit red m-segment digital tube display. 3. Features status indication with 4 built-in LED status indicator lights. 4. Full English operation menu, simple and practical. 5. Supports any sensor based on customer requirements. 6. Standard multiple signal output modes: 4-20mA output (standard 16-bit precision chip, transmission distance 1Km), RS485 output (standard MODBUS RTU protocol, transmission distance 1.2Km), relay output (1 set of passive dry contact output). 7. Multiple signal transmission methods available: 3-5 core cable, Ethernet cable, 433MHz wireless transmission, GPRS wireless transmission. 8. Full software auto-calibration, with up to 6-level target point calibration for sensors, ensuring measurement accuracy and linearity. 9. Features manual zero and target point calibration, factory reset, and analog 4mA and 20mA output calibration. 10. Includes wide voltage input, short circuit protection, reverse connection protection, anti-static interference, anti-magnetic field interference, and automatic recovery function. 11. Compatible with various remote control devices such as PLC, DCS, control alarms, secondary instruments, etc. 12. Hard anodized shell, explosion-proof and corrosion-resistant, suitable for prolonged use in harsh environments. 13. Optional infrared remote control sensor device for non-open-cover remote operation. 14. Optional temperature/humidity sensor, on-site audible and visual alarm, etc.
The MOT300 online gas detector measures the gas concentration in the environment through its built-in sensor, converting the detection signal into an electrical signal using ultra-large-scale integrated circuit technology and digital-analog hybrid communication technology. The instrument's internal 32-bit microprocessor and 24-bit ADC data acquisition chip process and analyze the signal, displaying the concentration value on a digital tube. It can simultaneously output 4-20mA, RS485, or relay signals, enabling remote detection, control, and alarm functions.
Petroleum, chemical, metallurgy, refining, gas transmission and distribution, biochemical and other industries.
Intelligent technology level design standards, explosion-proof and anti-corrosion standards.
1. Install the instrument in a suitable location, ensuring it is firmly fixed and connected to the power supply. 2. Connect the signal output wires (4-20mA, RS485, or relay) as needed. 3. Power on the device and check whether the digital tube display and status indicators are functioning normally. 4. Use the full English operation menu for setup, and select the sensor type, calibration parameters, etc. 5. If necessary, use the manual zero and target point calibration functions to adjust measurement accuracy. 6. Choose wireless transmission or remote control device connection based on the actual application. 7. After system startup, the instrument automatically monitors gas concentration, displaying and outputting signals in real time.
- Ensure the installation environment meets explosion-proof and anti-corrosion requirements, avoiding use under extreme conditions. - Check the voltage range before connecting to the power supply to prevent exceeding the wide voltage input specification. - Pay attention to short-circuit protection and reverse connection protection functions when wiring, and connect cables correctly. - When calibrating sensors, use professional tools or software following the operation manual. - If an optional infrared remote control is selected, ensure the sensing distance and follow the no-open-cover operation guidelines. - Regularly inspect communication lines and signal output to ensure normal remote control functionality. - If wireless transmission is chosen, confirm that the signal coverage range is free from interference. - Product appearance is subject to the actual item; specifications for non-standard or customized products must be confirmed in advance. - In case of abnormal alarms or faults, immediately inspect the sensors and system settings.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
