Product Overview
The Yunda YD-JLQ 10L Fiber Disintegrator is a specialized device for wet pulp disintegration, complying with ISO 5263 standards. It separates intertwined fibers in water through mechanical treatment while preserving the original structural properties of the fibers. Suitable for large, medium, and small paper mills, pulp mills, as well as research institutions and quality testing center laboratories, it is used for pulp disintegration and extracting standard pulp samples. It is the preferred equipment for studying, improving, and enhancing product quality.
Product Features
1. Fully complies with the requirements of ISO 5263, "Laboratory Wet Disintegration of Pulp."
2. Maximally preserves the original structural properties of the fibers.
3. Ensures the acquisition of reliable data from experiments, scientifically guiding research and production.
4. Enables efficient and economical utilization of raw pulp.
5. Suitable for large, medium, and small-scale paper mills, pulp mills, research institutions, and quality testing center laboratories.
Working principle.
The fiber standard disintegrator uses mechanical treatment to separate interwoven fibers in water through the action of the disintegrator, while preserving the original structural properties of the fibers to the greatest extent, enabling wet disintegration of the pulp. The pulp processed in this way can be used in experiments to obtain reliable data, guiding scientific research and production.
Application Areas
Laboratories of large, medium, and small-scale paper mills, pulp mills, research institutions, and quality testing centers.
Conforms to the standard
ISO 5263 "Pulps—Laboratory wet disintegration", QB/T 1462-1992 "Laboratory wet disintegration of pulp", JIS P8220-2-2012, TAPPI-T205
Operating steps
(Note: The product documentation does not include detailed operating steps. The following is based on general operation procedures for this type of equipment. Please refer to the actual product manual.)
1. Install the disintegrator according to the instrument instructions, ensuring all components are properly connected.
2. Add the pulp sample to be disintegrated into a container filled with an appropriate amount of clean water.
3. Start the disintegrator and perform mechanical treatment according to the set time and speed.
4. Upon completion of disintegration, stop the equipment and remove the treated pulp.
5. Clean the equipment for future use.
Precautions
- Please read the product manual carefully before use.
- Ensure a stable power supply during operation to avoid overloading.
- Regularly inspect equipment components and perform necessary maintenance.
- Take care to prevent water from splashing into the motor during use.
- Clean the equipment promptly after operation to prevent fiber residue.
- Follow safety operation procedures to avoid mechanical injury.
