Product Overview
The automatic film coater is equipment used in laboratories for coating films, replacing manual coating with automated processes to enhance coating accuracy and efficiency. This film coater is a wire bar-type automatic coating machine with a heating function. Its innovative wire bar installation method and flip-top scraper head significantly improve coating efficiency and ease of cleaning. It supports speed control and coating length adjustment, making it suitable for high-precision automatic film coating in laboratories. It is widely used for film preparation and prototyping in university research institutes, as well as in laboratories focused on new materials, hot melt adhesives, glues, resins, and other fields.
Product Features
1. The worktable is made of surface-hardened aluminum alloy, featuring high hardness and wear resistance, with flatness inspected using imported high-precision instruments.
2. Equipped with a heating function.
3. Comes with a high-precision film applicator, featuring an original imported wire-wound coating rod for uniform and highly accurate coating.
4. Touchscreen control panel for easy operation.
5. Coating length and speed can be freely adjusted.
Working principle
The working principle of the automatic laboratory coating machine is to uniformly apply the sample onto the substrate by controlling the coating head and coating parameters, forming the desired thin film.
Application Areas
Coatings, inks, paints, hot melt adhesives, lithium batteries, pressure-sensitive adhesives, resins, glues, polymer materials, pharmaceuticals
Operation Steps
1. Prepare the substrate and place it on the table.
2. Install the wire-wound rod applicator of the appropriate specification.
3. Set the coating length and coating speed on the touch screen.
4. Start the coater to begin automatic coating.
5. After coating is complete, clean the coating head and the table surface.
Precautions
- Ensure the work surface is clean and flat before coating.
- When installing the rod, pay attention to the correct direction and lock it securely.
- After using the heating function, allow it to cool before cleaning.
- The substrate should be firmly fixed to prevent movement.
- Avoid excessive coating speed to prevent uneven application.
- Clean the coater and work surface promptly after use.
