Product Overview
The 4-sided film applicator is an experimental film appliance with an accuracy of +/- 2 microns. It has two Spreader widths of 80 and 160mm. It is made of high-carbon chromium wear-resistant stainless steel and has good corrosion resistance. The Film Applicator will perform accuracy testing before leaving the factory. It adopts imported three-coordinate testing and comes with a factory test data report, which can stand up to Measurement. The SZQ 4-sided film applicator is suitable for sample Moulding proofing in Resin, coatings, glues, New materials, polymer materials and other fields. It supports non-standard customization and can also be matched with the laboratory Automatic Film Applicator for automatic film. Wherein SZQ-280 500/600/800/1000μm film Film thickness of 500μm, 600μm, 800μm, 1000μm, Spreader width 280mm, is an extended type 4-sided Applicator.
Product Features
1.9Cr18Mo high hardness stainless steel material, with good Abrasion Resistance and corrosion resistance, hardness value of 50~ 55HRC. 2.Accuracy up to +/- 2μm, to ensure the accuracy of the experiment. 3.Smooth surface, diverse styles, wide range of applications, support custom specifications. 4.Imported three-coordinate detection accuracy, with factory test report, can stand Measurement.
Working Principle
The 4-sided film applicator contacts the substrate through its precise coating surface to form a uniform wet film thickness. When filming, the Applicator is placed on the substrate and moves smoothly in the direction of the Spreader, so that the wet film thickness at the bottom of the Applicator is set. The coating in the groove is evenly Spreader on the surface of the substrate, so as to achieve precise control of the film Film thickness.
application field
Resin, Paint, Glue, New material, Polymer material
Meet the standard
no mention
Operation steps
1. Prepare the substrate and paint, and place the substrate on a smooth workbench. 2. Place the 4-sided film applicator on one end of the substrate to ensure that the coating surface is in contact with the substrate. 3. Pour an appropriate amount of paint into the groove of the Applicator. 4. Pull the Applicator smoothly and uniformly so that the paint is evenly Spreader on the substrate. 5. Remove the Applicator and wait for wet-film drying or curing.
Precautions
- Check whether the Applicator surface is clean and free of damage before use. - Ensure that the substrate surface is flat and clean. - Maintain a uniform speed when pulling the Applicator to avoid pause or acceleration. - Clean the Applicator in time after use to avoid paint residue affecting the accuracy. - Avoid collisions when storing to prevent affecting the accuracy.
