Product Overview
Automatic Film Applicator is a device for intermediate coating film in the laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. This Automatic Film Applicator is a bar drawdown blade Coater, using bar and drawdown blade two coating methods, with Vacuum chuck function, innovative bar installation method and clamshell drawdown blade head greatly improve Spreader efficiency, easy to clean, support speed control and Spreader length adjustment, suitable for laboratory High Accuracy automatic film, Moulding proofing in university research institutes, New material, lithium battery, glue, hot-melt adhesive and other laboratories.
Product Features
1) Surface hard treatment aluminum alloy countertop, high hardness and wear resistance, the flatness of the countertop is detected by imported High Accuracy instrument. 2) Big brand differential regulator, high film thickness control accuracy. 3) Flip type Blade Coating head, easy to clean. 4) With High Accuracy film applicator, the original imported bar film uniform accuracy is high. 5) Touchscreen control panel, simple operation. 6) Spreader length, Spreader speed freely adjusted. 7) With Vacuum chuck function, suitable for soft substrate Spreader such as film.
Working Principle
The Working Principle of the Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. This Automatic Film Applicator adopts two coating methods of bar and drawdown blade. The bar and drawdown blade heads can be fixed with the Vacuum chuck function to achieve High Accuracy automatic film.
application field
University research institutes, New materials, lithium batteries, glues, hot-melt adhesives, coatings, inks, paints, Stocks, lithium batteries, Pressure sensitive adhesives, Resin, polymer materials and other laboratories
Operation steps
1) Place the substrate on the countertop and turn on the Vacuum chuck to fix. 2) Set the Spreader length and Spreader speed parameters. 3) Select the bar or Blade Coating method according to the needs and install the corresponding Spreader head. 4) Start the device for automatic film. 5) After the Spreader is completed, clean the Spreader head and countertop.
Precautions
- Make sure that the countertop is clean and free of debris before use. - Pay attention to safety during operation and avoid hand contact with the moving area of the Spreader head. - Clean the Spreader head and countertop in time after the Spreader is completed to prevent residue curing. - Select the appropriate coating method and parameters according to the characteristics of the substrate. - Regularly check the Vacuum chuck function and equipment operation status.
