Product Overview
Automatic Film Applicator is a device for intermediate coating film in laboratories. It replaces manual film and automatically films to improve the accuracy and efficiency of film. This Automatic Film Applicator is a bar drawdown blade Coater with two functions: bar Spreader and Blade Coating. The innovative bar mounting method and clamshell drawdown blade head greatly improve the efficiency of Spreader and are easy to clean. It has speed control and Spreader length adjustment functions. It is suitable for laboratory High Accuracy automatic film.
Product Features
1. High flatness hard aluminum alloy baseplate, scratch resistant.
2. Big brand differential regulator, high film thickness control accuracy.
3. Flip Type Blade Coating Head, Easy to Clean.
4. High Accuracy film applicator with high accuracy of original imported bar film.
5. Touchscreen control panel, easy to operate.
6. Spreader length and Spreader speed can be adjusted freely.
Working Principle
Automatic Film Applicator controls the Spreader head and Spreader parameters to evenly Spreader the sample on the substrate to form the desired film. This Automatic Film Applicator uses bar Spreader and Blade Coating to achieve high-efficiency Spreader through clamshell drawdown blade and innovative bar mounting structure.
application field
Paint, inks, paints, Stock, Lithium Battery, Pressure sensitive adhesive, Resin, Glue, Polymer Materials, Pharmaceuticals and other film samples can be scraped on Glass, cardboard, cloth. At the same time, it is suitable for Moulding proofing in laboratories such as university research institutes, New materials, lithium batteries, glue, Resin, etc.
Operation steps
1. Prepare the substrate and sample.
2. Set the Spreader length and Spreader speed through the Touchscreen control panel.
3. Install bar or Blade Coating head.
4. Start Automatic Film Applicator for automatic film.
5. Clean the Spreader head after completing the Spreader.
Precautions
Make sure the baseplate and Spreader head are clean before use.
- Use a differential regulator to pay attention to accuracy when adjusting film thickness.
- Spreader head cleaning using clamshell design for easy operation.
Adjust the Spreader parameters according to the substrate type.
- Avoid sample spills or splashes during Spreader.
