Product Overview
Automatic Film Applicator is a device for intermediate coating film in laboratories. It replaces manual film and automatically films to improve the accuracy and efficiency of film. This Automatic Film Applicator is a bar drawdown blade Coater with two functions: bar Spreader and Blade Coating. The innovative bar mounting method and clamshell drawdown blade head greatly improve the efficiency of Spreader and are easy to clean. It has speed control and Spreader length adjustment functions. It is suitable for laboratory High Accuracy automatic film.
Product Features
1) High flatness hard aluminum alloy baseplate, scratch-resistant and scratch-resistant
2) Big brand differential regulator, high film thickness control accuracy
3) Flip Type Blade Coating Head for Easy Cleaning
4) High Accuracy film applicator with high accuracy of original imported bar film
5) Touchscreen control panel, easy to operate
6) Spreader length and Spreader speed can be adjusted freely
Working Principle
The Working Principle of the Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. This model has both bar Spreader and Blade Coating functions, and realizes high-efficiency Spreader through the innovative bar mounting method and the clamshell drawdown blade head.
application field
Paint, inks, paints, Stock, Lithium Battery, Pressure sensitive adhesive, Resin, Glue, Polymer Materials, Pharmaceuticals and other film sample preparation, can be scraped on Glass, cardboard, fabric
Operation steps
Prepare the substrate (e.g. Glass, cardboard, fabric) and place it on the baseplate
2) Select the coating method (bar or drawdown blade) and install the corresponding Spreader head
3) Set Spreader Length and Spreader Speed via Touchscreen Control Panel
4) Apply the sample evenly to the substrate
5) Start Automatic Film Applicator for Spreader and complete Moulding
Precautions
- Make sure the baseplate is flat and clean before use
- Follow the instructions when cleaning the Spreader head to avoid damage
- Use a differential regulator when adjusting film thickness to ensure accuracy
- Spreader parameters should be set according to sample and substrate characteristics
- Pay attention to safety during operation and avoid touching moving parts
