Product Overview
TM3300Pro/47 Automatic Film Applicator is a Spreader device for laboratory scenes. It uses automated control mode to replace manual film operation, which helps to improve film conformity and sample preparation efficiency. This model supports bar Spreader and Blade Coating. It is suitable for materials with different viscosity in high, medium and low. It also integrates heating function and Vacuum chuck function to meet the Spreader needs of various materials and substrates. The Spreader speed and Spreader length are set through the Touchscreen, which is easy to operate. The Spreader size and some functions support on-demand customization.
Product Features
1. Support bar, drawdown blade two coating methods, suitable for high, medium and low viscosity materials.
2.The effective coating area is 800 × 700mm, suitable for large size samples.
3. Vacuum chuck, fixed thin substrate.
4. Heating temperature up to 180 ° C, Temperature Uniformity +/- 1 ° C.
5. Blade Coating accuracy +/- 0.003mm, meyer rod coating accuracy +/- 0.001mm.
6. Spreader speed 1~ 300mm/s adjustable, Spreader length freely set.
7. Servo motor drive, smooth operation.
8. Touchscreen control, easy to operate.
9. Flip magnetic drawdown blade, easy to clean.
10. Snap bar groove, simple loading and unloading, reduce bar abrasion.
11. Spreader baseplate hard oxidation treatment, flat surface.
Working Principle
Automatic Film Applicator adopts automatic control mode, drives the Spreader device through the servo motor, and uniformly Spreaders the material at the set Spreader speed and Spreader length. The device supports bar Spreader and Blade Coating in two ways, selects the appropriate Spreader head according to the material viscosity, and fixes the substrate through the Vacuum chuck function to ensure the stability of the Spreader process.
application field
Inks, Stock, Lithium Battery Materials, Adhesive, hot-melt adhesive, gel, Resin, glue, polymer materials, polymer materials, pharmaceuticals and other materials for film sample preparation, suitable substrates include Glass, cardboard, non-woven fabrics, film, release paper, plastic, silicone
Operation steps
1. Choose the bar or Blade Coating method according to the material viscosity.
2. Place the substrate on the Spreader baseplate and turn on the Vacuum chuck to secure the substrate.
3. Set the Spreader speed and Spreader length on the Touchscreen.
4. Start the device for Automatic Spreader.
5. After the Spreader is completed, remove the sample and clean the Spreader device.
Precautions
Make sure the substrate surface is clean to avoid affecting the Spreader effect.
- Choose the appropriate coating method according to the material characteristics to avoid damage to the equipment or affect the accuracy.
When using the heating function, pay attention to the temperature setting not exceeding 180 ° C to avoid overheating.
- Regularly clean drawdown blades and bars to keep the equipment in good condition.
Before operation, check whether the components of the equipment are firmly installed to ensure safe use.
- If you need to customize the Spreader size or function, please contact the manufacturer for consultation.
