Overview
The TQC Baker coating applicator VF2145 is a cylindrical coating applicator with 4 paint surfaces for 4 preset thicknesses. With an application width of 60mm, it is suitable for Spreaders of a variety of products on flat or smooth solid substrates. Made of stainless steel, it resists erosion of acidic or alkaline substances in Coatings or cleaning agents.
Features
1. Compliant with ASTM D 3022 and ASTM D 823 standards
2. Cylinder design has 4 faces, Spreader 4 different thicknesses
3. Application width 60mm, suitable for most products and solid substrates
4. Stainless steel material, resistant to acid and alkali and chemical elements
5. wet film thickness 15/30/60/90µm, accuracy +/- 3μm
Principle
The Baker coating applicator uses a cylindrical design to scrape the coating on the flat substrate with 4 different heights to form a wet-film with a preset thickness. When Spreader, the coating applicator moves smoothly on the substrate, and the stainless steel material ensures that the Spreader process is stable and not affected by chemicals.
Applications
Plate Spreader, Solid Substrate Spreader
Standards
ASTM D 3022、ASTM D 823
Steps
1. Select the appropriate coating surface corresponding to the required thickness
2. Place the coating applicator on the flat substrate
3. Smooth moving coating applicator for Spreader
4. Clean the coating applicator in time after completing the Spreader
Notice
• Ensure that the substrate is flat and stable before use
• Spreader the coating applicator in time to prevent Coating residues
• Avoid the use of strong corrosion cleaning agents
• Keep the coating surface clean and drying during storage
