Overview
SHB-100 Force Gauge is a digital display Force Gauge produced by SUNDOO. It is a small and simple thrust and tension test instrument with the characteristics of High Accuracy and High Resolution. It is suitable for push-pull load test, plug-in force test, failure test, etc. of various products, and can be combined with machine and fixture to form a small testing machine.
Features
1. High Accuracy and resolution
2. Free setting and judgment of upper and lower deviation values, red and green indicator lights and buzzer automatic sound and light alarm settings
3. Test direction display
4. Blue backlight can be switched on and off
5. Can store 10 sets of test data and automatically calculate the average value of the stored data
6. Three units N, kgf, lbf are automatically converted
7. The data on the LCD screen can be flipped and displayed
8. With peak hold function, peak automatic release function and free setting of release time
9. Power-saving design of automatic shutdown without operation, free shutdown time setting
10. Serial port (Mini RS-232C) output, connected to the computer can realize the Linear dispersion test function, connected to the printer can print 10 sets of stored test data and MAX Maximum, MIN Minimum, average value, pass or fail value judgment, connect the dedicated machine to achieve When the predetermined stop value is reached, the machine stops moving
Principle
SHB-100 Force Gauge converts the force value into an electrical signal through built-in Sensor measurement of push-pull load, and displays it on the digital display screen after processing. It supports functions such as peak hold, automatic alarm and Data storage, and connects external devices through serial ports to realize data output and control.
Applications
Push-pull load testing, insertion force testing, and failure testing of various products
Steps
1. Read the instructions carefully before use
2. Connect the power supply or ensure that the battery is fully charged
3. Set the upper and lower limit deviation value, unit, backlight and other parameters as needed
4. Perform a push-pull load test and observe the display data
5. Use peak hold, Data storage, etc
6. Connect computer, printer or special machine through serial port for data output or control
7. After the test is completed, automatically shut down or manually shut down according to the settings
Notice
• Operating temperature: 20 ℃ +/- 10 ℃
• relative humidity: 35% RH~ 65% RH
• No vibration source and no corrosion medium around
• Please read the instructions carefully before use
• Make sure the battery charger input is AC 220V 50Hz and the output is DC 12V 300mA