Overview
SP-200 Force Gauge is a small and simple thrust and tension test instrument produced by SUNDOO. It has the characteristics of High Accuracy and High resolution. It adopts 240 × 320TFT color screen display to test Linear dispersion, supports upper and lower limit deviation setting, buzzer automatic alarm, Data storage and other functions. The instrument is suitable for push-pull load test, plug-and-pull force test and failure test of various products, and can be combined with machine and fixture to form a small testing machine.
Features
1. 240 × 320 pixel 65535 color TFT screen display;
2. Peak value, real-time value and test process Linear dispersion display on the same screen, which can monitor the whole test process;
3. The upper and lower limit deviation values are freely set and judged;
4. The screen can be flipped to display;
5. Can store 3 groups of Linear dispersion data;
6. Can store 70 sets of peak and tracking value data.
7. The four units N, kgf, lbf, and ozf are automatically exchanged.
8. With peak hold function, peak automatic release function and free release time setting;
9. Test the material strength by entering the material cross-sectional area.
10. Power-saving design for automatic shutdown without operation, with free shutdown time setting.
11. It can be connected to a dedicated machine to stop running when the predetermined force value is reached.
12, USB port hot plug connection PC, through the supporting software to achieve a variety of modes of measurement, unlimited storage, transfer, traceability test Linear dispersion data and custom test reports.
Principle
The SP-200 Force Gauge collects data in the 10% to 100% FS Measurement range through built-in Sensor measurement of thrust or tensile loads, and uses High Accuracy Graduation 0.1N for real-time calculations. The instrument displays test Linear dispersion, peak and real-time values through TFT color screen, combines upper and lower limit setting and alarm functions to monitor the test process, and can be connected to a PC or dedicated machine for automatic control and data management.
Applications
Product push-pull load test, insertion force test, failure test
Steps
1. Read the instructions carefully before use.
2. Connect the power supply or ensure that the battery is fully charged.
3. Set the upper and lower limit deviation value, unit, peak release time and other parameters as needed;
4. Carry out thrust or tensile test, monitor the Linear dispersion and value displayed on the screen;
5. Test data is automatically stored and can be exported or analyzed via a USB connection to a PC.
6. When there is no operation, the instrument automatically shuts down to save power.
Notice
• Operating temperature should be kept within the range of 20 ° C +/- 10 ° C;
• The relative humidity should be controlled between 35% RH and 65% RH;
• Ensure that there are no vibration sources and no corrosion media around;
• Read the instructions thoroughly before use to operate the instrument correctly.
• Pay attention to interface compatibility when connecting a dedicated machine or PC.
