Overview
CHIJIU MYP2011-250 powerbasic stirrer adopts brushless DC motor drive, single chip microcomputer control, closed loop speed regulation, Rotation speed stability, LCD display Rotation speed, swirl/spin encoder operation, serial core Impeller.
Features
1. Driven by a brushless DC motor
2. Microcontroller control
3. Closed loop speed regulation, Rotation speed is stable
4, LCD display Rotation speed
5, swirl/spin encoder operation
6. Serial Core Impeller Design
Principle
The powerbasic stirrer is powered by a brushless DC motor, controlled by a single-chip microcomputer, uses a closed-loop speed control system to ensure stable Rotation speed, and performs parameter setting and operation through a swirl/spin encoder. Rotation speed information is displayed in real time on the LCD screen.
Steps
1. Rotation speed setting: swirl/spin knob to set the desired Rotation speed (up clockwise, down counterclockwise)
2. Start and stop: After the Rotation speed is set, press the knob to start stirring, and press again to stop stirring
3. Rotation speed modification: The swirl/spin knob can modify the Rotation speed during the stirring process. When the knob swirl/spin, the LCD screen displays the modified value. After stopping the swirl/spin for 1 second, the actual Rotation speed is displayed.
Notice
• Stirrer should accelerate slowly from slow to fast when using
• If the straightness of the stirringrod is poor, the Rotation speed cannot be fast or a soft connecting shaft is used and fixed with a support sleeve in the middle
• Stirrer should not work too close to avoid clothing and hair getting involved
• Prevent liquid from splashing when stirring