Overview
DECO horizontal planetary Ball mill DECO-PBM-H-0.4L is a small laboratory grinding equipment, suitable for rapid, effective and accurate development, mixing and homogenization of samples. It has the characteristics of small volume, low noise, strong handling, comprehensive functions and fineness of grinding, and is widely used in chemical, food, beauty, metallurgy, ceramics, Glass, scientific research, teaching and other fields.
Features
1. Short grinding time, fine particle size and high accuracy
2. The horizontal operation of the ball mill tank effectively prevents the sample from sinking to the bottom and makes the grinding more uniform
3. High repeability ground conformity
4. Optional ball mill can be made of a wide range of materials, and can grind a variety of materials
5. Four working stations, each time can grind up to 4 different types and masses of materials
6. Under the same conditions, the accuracy conformity of each pot of each batch is high
7. With reverse, forward and reverse alternating operation, stepless speed regulation, timing, intermittent operation, Safety protection, power-off memory, data storage and many other functions
Principle
In the planetary Ball mill, the ball mill with the grinding ball and the sample also swirls/spins at high speed under the high-speed motion of the planetary disk. The intense energy is generated between the sample and the grinding ball in the continuous collision and friction with the inner wall of the ball mill, which makes the sample achieve a good crushing effect. DECO Planetary High Energy Ball mill grinding time is short, and the discharge is up to nano-fine particle size.
Applications
Pharmaceuticals, Food, Chemicals, Synthetic Materials, Electronics, Engineering, Metallurgy, Glass, Ceramics, Biology, Agriculture
Steps
1. Select ball mill material and grinding ball size
2. Set the function mode: forward operation, reverse operation, alternating positive and negative operation or intermittent operation
3. Set the grinding time: digital display 00:00:01 to 99:59:59
4. Set intermittent operation time: digital display 00:01:00~ 99:59:59
5. Perform stepless speed regulation settings
6. Start the equipment for grinding
7. Can be suspended or urgently stopped at any time
8. Use the power-off memory function to resume operation
Notice
• Feed particle size should be less than 2mm
• Processing capacity is 400ml
• Rotation speed of ball mill tank is 1100rpm
• Optional ball milling tank materials include stainless steel, nylon, polyurethane, polytetrafluoroethylene, polypropylene (PP), polymer polyethylene (PE), agate, aluminum oxide, zirconia
• Grinding ball size optional 3mm, 5mm, 8mm, 10mm
• Power supply voltage is 110-120V or 220-240V, Frequency 50-60Hz
Equipment Protection Rating IP53
