Overview
The TENCAN Powder XQM-2 Vertical Planetary Ball mill is a compact, fully functional, efficient and low-noise device. Designed for R & D institutions, institutions of higher learning and corporate laboratories, it can process four samples simultaneously, making it ideal for obtaining research samples and supporting sample grinding in a vacuum state with a vacuum ball mill tank.
Features
1. Small size, full function, high efficiency and low noise.
2. High-precision die stamping, Appearance generous and delicate, high-end stable.
3. The machined parts are processed by numerical control, and the planetary disk is cast and formed as a whole.
4. The transmission gears are made of special precision gears to ensure smooth and quiet high-speed operation.
5. The grinding tank pressing device is easy to operate, safe and reliable.
6. Support frequency conversion stepless speed regulation, which can precisely control the speed.
7. Two or four ball milling tanks can be operated simultaneously.
Principle
The equipment is a planetary Ball mill. Through the combined motion of revolution and rotation, the grinding ball generates strong impact and friction in the ball mill tank, so as to achieve fine grinding of materials.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, oxidation Zinc powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite
Steps
1. Select the appropriate ball milling tank (specification 50~ 500ml) and grinding ball according to the sample requirements.
2. Load the material into the ball milling tank, and the loading amount shall not exceed two-thirds of the volume of the ball milling tank.
3. Install the ball mill tank on the equipment station and fix it with a pressing device to ensure safety and reliability.
4. Set the total running time (1~ 9999min) and the alternating running time (1~ 999min) through the equipment control panel.
5. Set the revolution speed (35~ 335rpm) and rotation speed (70~ 670rpm).
6. Start the equipment and start the grinding process.
7. After running, close the equipment, remove the ball mill tank and obtain the ground sample.
Notice
The maximum sample loading shall not exceed two-thirds of the volume of the milling tank.
• Feed particle size requirements: Soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
The noise level during equipment operation is approximately ≤ 60 +/- 5dB.
• Make sure that the ball mill tank is firmly installed and the pressing device is in place before starting the equipment.
The weight of the equipment is 93kg, and attention should be paid to safety when moving and installing.
• Vacuum ball milling tank can be used for grinding operation in vacuum state.
