Overview
The TENCAN Powder XQM-6 Vertical Planetary Ball mill is a compact, fully functional, highly efficient and low-noise device. It is suitable for R & D institutions, universities and corporate laboratories. It can process four samples simultaneously to obtain research samples, and can be used to grind samples in a vacuum state by equipping a vacuum ball mill tank.
Features
1. High-precision die stamping, Appearance generous and delicate, high-end stable.
2. The machined parts are processed by numerical control, and the planetary disk is cast and formed as a whole.
3. The transmission gear is made of special precision gears to ensure smooth and quiet operation of the equipment at high speed.
4. The grinding tank pressing device is easy to operate, safe and reliable.
5. Small size, full function, high efficiency and low noise.
6. Can be equipped with a vacuum ball milling tank to support grinding samples in a vacuum state.
Principle
The equipment is a planetary Ball mill. Through the combined motion of revolution and rotation, the grinding ball generates strong impact and friction in the ball mill tank, so as to achieve fine grinding of materials.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, Phosphor, Zinc oxidation powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite
Steps
1. Select and install a suitable ball milling tank according to requirements (specifications can be 1 to 1.5L or 50 to 1000ml).
2. Load the material to be ground into the ball mill tank, and the sample loading does not exceed two-thirds of the volume of the ball mill tank.
3. Set the total running time (1~ 9999min) and the alternating running time (1~ 999min) through the equipment control panel.
4. According to the needs, set the rotation speed of revolution (35~ 335rpm) and rotation (70~ 670rpm) through the frequency conversion speed regulation function.
5. Start the equipment, and two or four ball milling tanks can work simultaneously.
6. After the run, take out the ground sample.
Notice
The maximum sample loading shall not exceed two-thirds of the volume of the milling tank.
* Feed particle size must meet the requirements: soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
The operating noise level of the equipment is approximately ≤ 65 +/- 5dB.
* Equipment weight is 93kg, handling and placement should be paid attention to.
* Power frequency is 220V-50HZ, please make sure the power supply matches.
* Can be equipped with a variety of ball milling tank specifications, please choose the appropriate tank according to the processing capacity (maximum 6L) and sample requirements.
