Overview
The LABO LB-ZT70 stiffness Sampler is a dedicated, standard specimen prepative for precisely cutting specimens required for Cardboard stiffness and crease stiffness testing.
Features
1. Adopt stamping sampling method.
2. High sampling accuracy, no rough edges.
Principle
The Sampler is stamped to cut samples that meet specific size and accuracy requirements from the Cardboard to be tested to meet the standard requirements of subsequent stiffness tests.
Applications
Cardboard stiffness test, crease stiffness test
Standards
BS6965, GB/T22364 (method A), GB/T23144 (two-point loading), QB/T1051, ISO5628, ISO2493, TAPPI T556, SCAN P29, DIN 53121, BS3748, NFQ03-048
Steps
1. Place the test Cardboard on the Sampler bench.
2. Adjust and confirm the sampling position.
3. Operation Sampler for stamping sampling.
4. Remove the cut standard sample.
Notice
Please read the instruction manual carefully before use.
• Ensure that the thickness of the Cardboard Film to be tested is within the range of 0.1~ 2.5mm.
• Maintain the equipment regularly to maintain sampling accuracy.
• Pay attention to safety during operation to avoid pinching.
• Please pay attention to shockproof and moisture-proof when transporting and storing.
