Overview
The LABO 9030A High Temperature Test Chamber is a device for rapid drying (moisture measurement) and aging performance testing of paper, Cardboard and Miscellaneous materials under high temperature conditions. The liner is made of mirror stainless steel, designed for easy cleaning, and is equipped with a High Accuracy microcomputer temperature control system to ensure the accuracy and reliability of the test process.
Features
1. The liner is mirror stainless steel, with four corners in an arc for easy cleaning.
2. With temperature control protection digital display, High Accuracy microcomputer temperature control instrument temperature control, accurate and reliable.
3. The hot air circulation system consists of a low-noise, high-temperature resistant motor and a professionally designed air duct to ensure uniform temperature in the working room and small Fluctuation.
Principle
The equipment sets and controls the temperature in the box through the High Accuracy microcomputer thermostat, and uses a hot air circulation system composed of low-noise, high-temperature resistant motors and professional air ducts to force the hot air to circulate inside the studio to achieve fast and uniform heating, thereby completing the drying or aging test of the material.
Applications
Paper, Cardboard and Miscellaneous Materials Rapid drying (moisture measurement), aging performance test
Standards
GB/T462、GB/T464、GB/2677.2、ISO536
Steps
Connect the power cord to the AC 220V 50Hz power supply.
2. Set the required test temperature (RT + 10~ 250 ° C) through a microcomputer thermostat.
3. Place the sample to be tested in the studio.
4. Start the equipment and start the test.
5. After the test, turn off the equipment and remove the sample.
Notice
• Power frequency is AC 220V 50Hz.
• The input power of the device is 4000W, please use the matching power line.
• Please read the instruction manual carefully before operation.
Do not touch high-temperature components while the device is running.
When cleaning the liner, make sure the equipment is powered off and chilled down.
• Please check the standard configuration according to the packing list: 1 test chamber, power cord, factory certificate, instruction manual (including instructions for use and maintenance instructions).
