Overview
AN AD10 high-speed dispersion Mulser is a laboratory equipment. It is driven by a miniature high-power high-speed motor imported from Germany. It is suitable for Stir mixing of low to medium and high viscosity liquids, dispersion homogenization of granular materials and crushing of tissue cells. The machine is composed of a high-speed motor, a stainless steel dispersion homogenization head and a base. The main engine adopts an engineering plastic and a die-casting aluminum alloy body. The operation is stable and the speed is adjustable to ensure effective and controllable experimental operation.
Features
1. Adopt miniature high-power high-speed motors imported from Germany.
2. The main engine is made of high-quality engineering plastic and die-cast aluminum alloy, and the operation state is stable.
The working head is made of high-quality stainless steel (SS316) for a wide range of experimental applications.
4. The running speed can be adjusted and controlled (6 gears, 13,000 to 34,000 rpm) to meet the correction requirements for the running speed in the experiment.
5. Stir mixing, homogenization and cell crushing of low to medium and high viscosity liquids.
Principle
The device drives the stainless steel working head swirl/spin through a high-speed motor, so that the experimental medium is subjected to the triple effect of extrusion, strong Impact and loss of pressure expansion in the material liquid, so as to achieve the refinement, crushing and more uniform mixing of the material, to prevent or reduce the material liquid delamination.
Applications
Tissue dispersion in biotechnology, sample preparation, enzyme processing in the food industry, industry, cosmetic industry, paints industry, Petrochemicals, etc
Steps
1. Power frequency AC 220V 50/60Hz.
2. Prepare materials according to experimental requirements (processing capacity 20~ 100mL, viscosity below 1000cp, temperature below 80 ° C).
3. Immerse the working head in the liquid, ensuring that the immersion height is between a minimum of 25mm and a maximum of 130mm.
4. Turn on the device and select the desired speed (range 13000~ 34000rpm) through the 6-speed speed regulation method.
5. During operation, the rotational speed can be adjusted at any time according to the experimental effect.
6. After the experiment is completed, turn off the equipment and clean the working head.
Notice
* Please ensure that the viscosity of the treated material is below 0.2Pa.s (or 1000cp) and the temperature is below 80 ° C.
The height of the working head immersed in the liquid should be between 25mm and 130mm.
* Ambient Temperature should be ≤ 40 ℃, relative humidity should be ≤ 80%.
* Equipment Duty Cycle is continuous operation (S1), do not overload.
* Please pay attention to safety when operating and avoid contact with high-speed swirling/spinning work heads.
Please clean the stainless steel working head promptly after use.
