Overview
The AN AD8 high-speed dispersion Mulser is driven by a miniature high-power high-speed motor imported from Germany, which is suitable for Stir mixing of low to medium and high viscosity liquids in the laboratory, dispersing and homogenizing granular materials and crushing tissue cells. The machine is composed of a high-speed motor, a dispersing and homogenizing working head and a machine base. The main engine adopts an engineering plastic and a die-casting aluminum alloy body for stable operation. The working head is refined in stainless steel, which has a wide range of applications. The speed is adjustable to ensure the effective and controllable experimental operation.
Features
1. Driven by a miniature high-power high-speed motor imported from Germany.
2. The main engine is made of high-quality engineering plastic and die-cast aluminum alloy, and the operation state is stable.
3. The working head is made of high-quality stainless steel and has a wide range of experimental applications.
4. The running speed can be adjusted and controlled to meet the constant correction of the running speed during the experiment, ensuring that the experimental operation is effectively controllable.
5. Stir mixing, homogenization and cell crushing of low to medium and high viscosity liquids.
Principle
The machine drives the working head swirl/spin through a high-speed motor, so that the experimental medium is subjected to the triple action of extrusion, strong Impact and loss of pressure expansion in the material liquid, so as to realize the refinement of the material and more uniform mixing, and prevent or reduce the delamination with the material liquid.
Applications
Tissue dispersion in biotechnology, sample preparation, enzyme processing in the food industry, industry, cosmetic industry, paints industry, Petrochemicals, etc
Standards
Duty Cycle: S1 (continuous)
Steps
1. Power frequency AC 220V 50/60Hz.
2. Prepare the material according to the experimental requirements (processing capacity 15~ 50mL, viscosity below 0.2Pa.s, temperature below 80 ° C).
3. Immerse the working head in the liquid to ensure that the immersion height is between 15mm and 105mm.
4. Select the desired speed (range 13000 to 34000rpm) through the 6-speed speed regulation mode.
5. Start the device for decentralized emulsification operation.
6. After the operation is completed, turn off the power supply and clean the working head.
Notice
• Power frequency AC 220V 50/60Hz, current 3.4A.
• When handling materials, the liquid viscosity should be less than 0.2Pa.s (maximum processing viscosity 1000cp), and the temperature should be lower than 80 ° C.
• The height of the working head immersed in the liquid should be between 15mm and 105mm.
Equipment Ambient Temperature should be ≤ 40 ℃, relative humidity should be ≤ 80%.
• Equipment Duty Cycle is continuous operation (S1), do not overload.
• Please pay attention to safety when operating and avoid contact with high-speed swirling/spinning work heads.
• Please clean the working head in time after use and keep the equipment drying.
