Overview
AN AE500S-P (70G) controlled high-speed shearing dispersion Mulser is driven by a compact series-excited micro-high-speed motor, which is suitable for mixing low to medium and high viscosity liquids in laboratories or pilot workshops, and pulverizing granular materials in liquid medium. The machine consists of high-speed motor, shearing emulsification head and speed control controller.
Features
1. The main engine is made of high-quality engineering plastics and die-casting aluminum alloys, with stable operation.
2. The working head is made of high-quality stainless steel, with a wide range of experimental applications.
3. The running speed is controlled by the microprocessor, which can instantly and effectively compensate for the speed changes caused by load changes and Power frequency fluctuations, and the constant speed is reliable;
4. Built-in soft start and automatic overload protection ensure the safety of continuous operation at full load for a long time.
5. Stepless adjustment of rotational speed to meet the constant correction of Stir rotational speed in the experiment.
6. "P-type" dynamic indicator display, no timing function.
Principle
The device can refine the experimental medium in the material liquid through the triple action of extrusion, strong Impact and depressurized expansion, so that the materials can be mixed with each other more uniformly, and the delamination with the material liquid can be prevented or reduced.
Applications
In the field of biotechnology, tissue dispersion, sample preparation, enzyme treatment in the food industry, industrial, cosmetic industry, paints industry, and Petrochemicals, etc., the experimental aspects of liquid and liquid phases, liquid and solid phases, such as dairy products, beverages, cosmetics, and other products. Homogenization and emulsification processes in the production process.
Steps
Power frequency meets AC 220 +/- 10% V requirements;
2. Choose the appropriate stator standard configuration (5mm ², 20mm ² or 50mm ²) according to the processing capacity (500~ 40000mL) and viscosity (maximum 8000cp);
3. Immerse the working head in the liquid to ensure that the immersion height is between a minimum of 50mm and a maximum of 236mm.
4. Stepless speed regulation is carried out through the speed control controller, and the set speed is within the range of 2000 to 14000rpm.
5. Start the device, and the built-in soft start function will start smoothly.
6. During operation, the microprocessor will automatically compensate for load and voltage fluctuations to maintain a constant speed, and the overload protection function ensures safety.
7. Observe the running status through the "P-type" dynamic indicator;
8. After the experiment, turn off the power and clean the equipment.
Notice
• Duty Cycle is S1 (continuous), but the Permissible Ambient Temperature should be ≤ 40 ° C and the relative humidity should be ≤ 80%;
• Ensure that the input power is 850W, the output power is 500W, and the rated frequency is 50/60HZ;
• Note that the maximum linear speed of the rotor is 20.5m/s, and the rated torque is 1.78 N.m (main engine) and 34.0 N.cm (working head);
• The weight of the equipment is 9.2kg and the dimensions are 215 * 310 * 720mm. Pay attention to stable placement during operation;
• Avoid operating under conditions exceeding the maximum treatment viscosity;
• After use, the working head and other components should be cleaned in time to maintain the performance of the equipment.
