Overview
HUITAI GHP-9270 water-proof thermostatic incubator is suitable for scientific research or production departments such as industry, biochemistry and agricultural science, for thermostatic experiments such as cell fostering and fermentation. The product adopts Water-Jacketed heating method, which has the characteristics of uniform temperature and long holding time after power failure.
Features
1. Large-screen LCD display, multiple sets of data are displayed on one screen, and the menu-type operation interface is simple to understand and easy to operate.
2, the use of self-designed pressure equilibrate intake, to avoid the phenomenon of pumping caused by too fast water.
3. Double-decked door structure, good thermal insulation performance, does not affect the temperature in the box when observing the situation in the box.
4. Water-Jacketed heating method, uniform temperature, and can still maintain thermostatic for a long time after power failure.
5. Mirror stainless steel liner, four corners and half arc design is easy to clean, and the shelf spacing in the box is adjustable.
6. Cold rolled steel plate is used for the casing of the box, and the surface is electrostatic sprayed.
7, PID control mode, the temperature in the box exceeds the set value or the water level of the water jacket is too high or too low, that is, the sound and light alarm is automatically issued. Low water level stops heating.
8. Independent temperature limit alarm system, which automatically interrupts when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents. (optional)
9. With RS485 interface or USB interface, it can be connected to a computer or printer to record changes in temperature parameters. (optional)
Principle
The incubator uses a water-jacketed heating method to evenly heat the studio through a water bath jacket. The control system uses a PID algorithm to precisely control the heating output to maintain a constant temperature in the box. When the temperature exceeds the set value or the water level of the water jacket is abnormal, the system will automatically issue a sound and light alarm and take corresponding protective measures.
Applications
Industry, biochemistry, agricultural science, cell fostering, fermentation
Steps
1. Judge the operation of the equipment according to the status of the indicator light: the "OUT" light is on to indicate that there is a heating output; the "ALM" light is on to indicate an over-temperature alarm; the "WL" light is on and the buzzer beeps to indicate that the water level is too low; the "WH" light is on to indicate that the water has been filled.
2. Perform parameter setting and operation through the large-screen LCD menu interface.
Notice
* The performance parameter test is carried out under no-load conditions, no strong magnetism, no vibration, Ambient Temperature is 30 ℃, environment humidity is 50% RH.
When the water level is low, the heating will automatically stop.
* Optional accessories such as independent temperature limit alarm system, embedded printer, RS485 interface and special software.
