Overview
The AN AM110W-T Constant Speed Stirrer is a laboratory device driven by a brushless DC motor, suitable for Stir mixing of low to medium and high viscosity liquids. The machine is compact, low-noise, maintenance-free, and is controlled by a microprocessor to achieve precise constant speed, which can effectively compensate for load and voltage fluctuations. It also has automatic overload protection, touch control, stepless speed regulation, digital display and timing functions to ensure stable, intuitive and controllable experimental processes.
Features
1. Driven by brushless DC motor, compact structure, ultra-low noise, maintenance-free.
2. The microprocessor controls the speed, which can instantly compensate for load changes and Power frequency fluctuations, and the constant speed is reliable.
3. Built-in automatic overload protection device to ensure the safety of long-term high-load continuous operation.
4. Capacitive touch keyboard control, easy to operate.
5. Stir speed stepless adjustment, to meet the experimental Stir speed at any time correction.
6. TFT digital display settings and actual output speed, as well as the process change trend of speed increase or decrease, ensure the intuitive collection of experimental data.
7. Equipped with running timing control function (1~ 6000min) to ensure that the experimental time is effectively controllable.
8. With speed dynamic detection, speed trend Linear dispersion and speed memory function.
9. The Impeller is fixed with a quick rotating chuck, and the clamping range is φ 2~ 10mm, which is convenient to operate.
10. Stir processing capacity up to 20L, the maximum viscosity can be processed up to 10000mPa.s.
Principle
The constant speed Stirrer is powered by a brushless DC motor, and its speed is precisely controlled by a microprocessor. The microprocessor system can monitor and compensate for the speed deviation caused by Stir load changes or external Power frequency fluctuations in real time, so as to maintain the set constant stirring speed. At the same time, the system intuitively feeds back the speed information and change trend through digital display and dynamic detection functions.
Applications
Laboratory Low viscosity Liquid Stir, Laboratory Viscosity Liquid Stir, Laboratory High viscosity Liquid Stir, Stock Stir
Standards
Protection Rating IP40
Steps
1. Connect the device to AC100~ 240V, 50/60Hz power supply.
2. Install the appropriate size (φ 2~ 10mm) Impeller through the quick-acting chuck.
Stir speed required by touch keyboard setting (stepless adjustment in the range of 30~ 2000rpm).
4. If you need timing, set the running time (1~ 6000min) through the keyboard.
5. Start the device and observe the set speed, actual output speed and changing trend through the TFT display.
6. During the experiment, the speed can be adjusted steplessly at any time as required.
7. After the experiment is completed or the timing is reached, the equipment stops running.
Notice
* Power frequency in the range of AC100~ 240V.
* Ambient Temperature should be ≤ 40 ℃, relative humidity should be ≤ 80%.
* Impeller penetration diameter up to 8mm, do not use over-spec stirringrod.
Equipment is protected against overload, but do not overload for long periods of time.
* Please select the appropriate Stir parameter according to the viscosity (up to 10000mPa.s) and amount (up to 20L) of the processing medium.
* Note that the Protection Rating of the device is IP40, do not use in environments beyond this protection condition.
Impeller material can be selected from 3Cr13 stainless steel or SS 316L stainless steel. Please choose the appropriate material according to the characteristics of the experimental medium.
