Overview
BOZHEN BZ-12-10TC Pottery and porcelain fiber muffle furnace is an integrated program temperature control periodic operation heater. It adopts Pottery and porcelain fiber furnace and multi-sided heating element, which has the characteristics of fast heating speed, significant energy saving, high working efficiency, and good temperature distribution uniformity in the furnace cavity. It can improve the experimental environment, and the energy saving rate reaches 40%.
Features
1, using liquid crystal program control instrument, high luminance, wide window digital display, clear indication, intuitive.
2. With a 30-stage programming setting, it is suitable for complex experimental processes, microcomputer intelligent control, and solves temperature overshoot and other drawbacks. The temperature control effect is very good.
3. After setting the temperature, the instrument controls the heating and thermostatic by itself, and the temperature control is accurate and stable.
4. With safety protection measures: fault sound and light alarm, over-temperature sound and light alarm, and automatically cut off the heating output. Open the door and stop heating.
Principle
The muffle furnace adopts a PID adjustment control system, and the temperature is measured by K-indexing nickel-chromium-nickel-silicon Thermocouple. The microcomputer intelligent controller automatically controls the heating and thermostatic process according to the set program (up to 30 segments). The heating element (nickel-chromium wire) is heated on multiple sides in the Pottery and porcelain fiber furnace, and is insulated by thermal insulation materials to achieve efficient and uniform heating.
Applications
Coal, electricity, chemical, building materials, metallurgy, R & D institutions and Universities & colleges do sintering, heating and heat treatment laboratories.
Standards
National C-class furnace standard.
Steps
1. Connect the power supply (380V 50Hz).
2. Control the temperature program required by the instrument setting through the LCD program (up to 30 segments).
3, start the equipment, the instrument will automatically control the heating, thermostatic process.
4. After the experiment is completed, the equipment can automatically stop heating or be turned off manually.
Notice
• The heating will automatically stop when the device opens the door, please pay attention to safety.
• Pay attention to the over-temperature alarm prompt, the equipment has the function of over-temperature automatic protection.
• Power frequency is 380V 50Hz.
Equipment weight about 50KG, please pay attention when handling.
• The Thermocouple interface is located above the back of the furnace body, and the terminal is located below the back of the furnace body. Please pay attention to the connection.
• The controller is located under the furnace body with a built-in control system.
