Overview
BOZHEN BZ-10-12TC Pottery and porcelain fiber muffle furnace is an integrated program temperature control muffle furnace using Pottery and porcelain fiber furnace and multi-faceted heating elements. It is a periodic working heater. The product has the characteristics of fast heating speed, uniform temperature distribution, significant energy saving (energy saving rate up to 40%), and high work efficiency. It has been tested to meet the national C-class furnace standard, which can greatly improve the experimental environment of the staff.
Features
1, the use of liquid crystal program control instrument, high luminance, wide window digital display, clear indication, intuitive.
2. With a 30-stage programming setting, it is suitable for complex experimental processes, microcomputer intelligent control, and solves temperature overshoot and other drawbacks. The temperature control effect is very good.
3. After setting the temperature, the instrument controls the heating by itself, thermostatic, and the temperature control is accurate and stable.
4. Safety protection measures: fault sound and light alarm, over-temperature sound and light alarm, and automatically cut off the heating output. Open the door and stop heating.
Principle
Pottery and porcelain fiber furnace is used in the muffle furnace, the heating element is nickel-chromium wire, and the multi-sided heating method is used to make the temperature distribution in the furnace cavity uniform. The temperature control system uses K-indexed nickel-chromium-nickel-silicon Thermocouple for temperature measurement, and 30-stage programming settings are carried out through a PID-adjusted microcomputer intelligent controller to realize full-scale programmable, automatic control of temperature rise and thermostatic. Built-in two-stage overtemperature protection device, sound and light alarm and automatic cut off heating output when overheating to ensure safety.
Applications
Coal, electricity, chemical, building materials, metallurgy, R & D institutions and Universities & colleges for sintering, heating and heat treatment
Standards
National C-class furnace standard
Steps
1. Connect the power supply (380V 50Hz).
2. Control the temperature program required by the instrument setting through the liquid crystal program under the furnace body (up to 30 segments).
3, start the equipment, the instrument will control the heating and thermostatic process by itself.
4. After the experiment is completed, the equipment can be programmed to stop heating or manually shut down.
Notice
• Power frequency is 380V 50Hz before use.
• When the equipment is running, do not open the furnace door at will, the door opening will trigger the protection function of stopping heating.
• Pay attention to the equipment alarm prompt, in case of failure or over-temperature alarm, please check and deal with it in time.
• Below the back of the furnace body is the heating wire terminal, and above the back is the Thermocouple temperature measurement port. Please pay attention to safety during operation.
The weight of the equipment is about 40KG, so pay attention when moving and installing.
• Do not use above the maximum temperature of 1200 ° C.
