Overview
BOZHEN 101-1AD digital blast drying oven is an electric air blowing dryer with intelligent digital temperature control instrument. The maximum operating temperature is 300 ° C and the Inner chamber dimensions are 450x450x350mm. It is suitable for baking, drying, heat treatment and Miscellaneous heating. It can be used in industry or in the laboratory. Its operating temperature can be arbitrarily set between room temperature and maximum temperature, and it is kept thermostatic with the help of an automatic control system.
Features
1. Adopt intelligent digital temperature control instrument, precise temperature control, intuitive reading, high Sensitivity and easy operation.
2. The liner is made of good steel plate, high temperature silver paste lame plating, wear resistance and high temperature resistance.
3. Equipped with an electric blower to promote mechanical convection of indoor hot air and make the temperature more uniform.
4. Equipped with over-temperature alarm device, the buzzer alarm when the thermostat is over-temperature or out of control, can cut off the power supply to troubleshoot.
5. Glass doors are provided for observing the conditions in the working room.
6. The exhaust valve or external exhaust pipe can be opened to change the air in the working room.
Principle
The drying oven generates heat through an electric heating system. The intelligent digital temperature controller (PID controller) automatically adjusts the heating power to make the studio temperature reach and stabilize at the set value. At the same time, the electric blower works to force the air circulation in the box to form a uniform temperature field to ensure uniform and stable heating effect.
Applications
Baking, drying, heat treatment, industrial heating, laboratory heating
Steps
1. Place the test product on the shelf in the studio. If the test product is large, the shelf can be removed.
2. Close the door and set the required operating temperature through the intelligent digital temperature controller.
3. Turn on the power supply, start the equipment, and start the heating and blast system.
4. The device automatically heats up to the set temperature and remains thermostatic.
5. During the working process, the internal situation can be observed through the Glass door on the box door.
6. If you need to change the air, you can open the exhaust valve or an external exhaust pipe.
7. After the work is completed, turn off the power supply and remove the sample after the temperature in the box decreases.
Notice
* It is not suitable for placing items with volatiles in the drying oven to avoid explosion.
The side door of the control layer on the side of the equipment can be removed for inspection or repair of the wiring.
* In case of over-temperature alarm, the power supply should be cut off in time and troubleshooting.
* Power frequency is 220V before use.
Do not perform internal maintenance while the equipment is running.
