Overview
BOZHEN 101-2AD digital blast drying oven is an electric air blowing dryer with intelligent digital temperature control instrument. Its liner is made of steel plate, high temperature silver paste lame plating, wear-resistant and high temperature, the maximum operating temperature is 300 ° C, Inner chamber dimensions are 450x550x550mm. The equipment is suitable for baking, drying, heat treatment and Miscellaneous heating, and can be used in industry or laboratory. Its operating temperature can be arbitrarily set between room temperature and maximum temperature, and it is thermostatic through the automatic control system in the box.
Features
1. Using intelligent digital temperature control instrument, high temperature control accuracy, intuitive reading, high Sensitivity, easy to operate.
2. The liner is made of steel plate, and the surface is treated with high temperature silver paste lame plating, which is wear-resistant and high temperature-resistant.
3. Equipped with an electric blower to promote the mechanical convection of hot air and make the temperature of the studio more uniform.
4. Equipped with over-temperature alarm device, the buzzer alarm when the thermostat is over-temperature or out of control can remind the user to cut off the power supply and troubleshoot.
5. Glass observation window is provided in the box door, which is convenient for observing the situation in the working room.
6. The exhaust valve or external exhaust pipe can be opened to replace the air in the working room.
Principle
The drying oven generates heat through an electric heating element, which is automatically controlled by an intelligent digital temperature controller (PID controller) to maintain the thermostatic within the set temperature range. The box is equipped with an electric blower, which prompts the forced circulation of hot air in the studio. Convection, thus ensuring uniform temperature distribution.
Applications
Baking, drying, heat treatment, industrial heating, laboratory heating
Steps
1. Place the items to be processed on the test shelf in the studio.
2. Close the door and set the required operating temperature through the intelligent digital temperature controller.
3. Turn on the power supply and start the device to start heating.
4. The device will automatically heat up to the set temperature and remain thermostatic.
5. Glass doors can be used to observe internal conditions during work.
6. After the work is completed, cut off the power supply and remove the items after the temperature in the box decreases.
Notice
• It is not suitable for placing items with volatile substances to avoid explosion.
• If the sample is large, the shelf can be removed to expand the storage space.
• The air in the working room can be replaced by opening the exhaust valve or connecting the external exhaust pipe.
• The side door of the control layer can be removed for inspection or repair of the circuit.
• When the over-temperature alarm device triggers the buzzer alarm, the power supply should be cut off in time and the fault should be eliminated.
