Overview
BOZHEN 101-3AD digital blast drying oven is an electric blast drying equipment using an intelligent digital temperature control instrument. Its liner is made of steel plate, high temperature silver paste lame plating, wear-resistant and high temperature, the maximum operating temperature is 300 ° C, Inner chamber dimensions are 500x600x750mm, suitable for baking, drying, heat treatment and Miscellaneous heating. It can be used in industry and laboratories. The operation temperature range of the equipment can be raised from room temperature to the highest temperature. After selection, it can be automatically thermostatic, and it is equipped with an electric blower to promote hot air convection and make the temperature more uniform.
Features
1. Adopt intelligent digital temperature control instrument, precise temperature control, intuitive reading, high Sensitivity and easy operation.
2. The liner is made of good steel plate, and the surface is lame plated with high temperature silver paste, which is wear-resistant and high temperature-resistant.
3. Equipped with an electric blower to promote mechanical convection of indoor hot air, resulting in a more uniform temperature distribution.
4. With over-temperature alarm device, the buzzer will alarm when the thermostat is over-temperature or out of control, reminding the user to cut off the power supply and troubleshoot.
5. Glass observation window is provided in the box door, which is convenient for observing the situation in the working room.
6. The exhaust valve or external exhaust pipe can be opened to facilitate the replacement of the studio air.
7. The side door of the control layer can be removed for easy inspection or repair of the circuit.
Principle
The drying oven generates heat through an electric heating element, which is automatically controlled by an intelligent digital temperature controller (PID controller), which can achieve thermostatic within the set temperature range. At the same time, an electric blower is installed in the box to force the hot air to perform mechanical circulation convection inside the studio, thereby accelerating heat transfer and making the temperature distribution in the working room more uniform.
Applications
Baking, drying, heat treatment, industrial heating, laboratory heating
Steps
1. Place the test product on the shelf in the studio. If the test product is large, the shelf can be removed.
2. Close the box door and observe the interior through the Glass door.
3. Turn on the power supply and set the required operating temperature through the intelligent digital temperature controller.
4. The device starts to heat up, and automatically enters the thermostatic state after the temperature reaches the set value.
5. During the working process, the exhaust valve can be opened or the exhaust pipe can be connected to replace the air as required.
6. After use, cut off the power supply.
Notice
• It is not suitable for placing items with volatile substances to avoid explosion.
• Note that the maximum operating temperature of the device is 300 ° C, please do not use it over temperature.
• When the buzzer of the over-temperature alarm device rings, the power supply should be cut off in time and the fault should be eliminated.
• When performing line inspection or repair, the side door of the control layer can be removed.
• Power frequency is 220V and input power is 5000W.
