Overview
BOZHEN 101-1ADS digital blast drying oven is an electric air blowing dryer with intelligent digital temperature control instrument. The liner is made of stainless steel, the maximum operating temperature is 300 ° C, and the Inner chamber dimensions are 450x450x350mm. It is suitable for baking, drying, heat treatment and Miscellaneous heating. It can be used in industry or in the laboratory. The operation temperature range of the equipment can be raised from room temperature to the maximum temperature. After the temperature is selected, it can be kept thermostatic by the automatic control system.
Features
1. Adopt intelligent digital temperature control instrument, precise temperature control, intuitive reading, high Sensitivity and easy operation.
2. The liner is made of stainless steel, which is durable and easy to clean.
3. Equipped with an electric blower, it promotes the mechanical convection of hot air and makes the indoor temperature more uniform.
4. With over-temperature alarm function, when the thermostat is over-temperature or out of control, the buzzer alarm reminds the user, and the power supply can be cut off to troubleshoot.
5. Glass doors are provided for easy observation of the working room.
6. The exhaust valve or external exhaust pipe can be opened to change the indoor air.
Principle
The drying oven is heated by an electric heating element and automatically controlled by an intelligent digital temperature controller (PID controller), so that the temperature of the studio reaches and remains constant at the set value. At the same time, the built-in electric blower continues to work, forcing hot air to circulate inside the studio to ensure uniform temperature distribution. When the temperature exceeds the set safe range, the over-temperature alarm device will start the buzzer alarm.
Applications
Baking, drying, heat treatment, industrial heating, laboratory heating
Steps
1. Place the test product on the shelf in the studio. If the test product is large, the shelf can be removed.
2. Close the door and set the required operating temperature through the digital temperature controller.
3. Connect the power supply, start the equipment, and start the heating and blast system.
4. The device automatically heats up to the set temperature and remains thermostatic.
5. Glass doors can be used to observe internal conditions during work.
6. If you need to change the air, open the exhaust valve or connect the exhaust pipe.
7. After the work is completed, turn off the power supply and wait until the temperature in the box decreases before removing the items.
Notice
• It is not suitable for placing items with volatile substances to avoid explosion.
The side door of the control layer on the side of the equipment can be removed for inspection or repair of the circuit.
• When the over-temperature alarm buzzer sounds, the power supply should be cut off in time and the fault should be eliminated.
• There is a thermal insulation layer between the studio and the box shell, please do not disassemble it at will.
• When taking and placing items, please pay attention to high temperature to avoid burns.