Overview
BOZHEN 101-3ADS digital blast drying oven is an electric air blowing dryer with intelligent digital temperature control instrument. The liner is made of stainless steel and has an over-temperature alarm function. The maximum operating temperature is 300 ° C and the Inner chamber dimensions are 500x600x750mm. The equipment is suitable for baking, drying, heat treatment and Miscellaneous heating, and can be used in industry or in laboratories. Its operating temperature can be raised from room temperature to the highest temperature, and can be arbitrarily selected within this range. After selection, it can be kept thermostatic through the automatic control system in the box.
Features
1. Adopt intelligent digital temperature control instrument, precise temperature control, intuitive reading, high Sensitivity and easy operation.
2.The liner is made of stainless steel, durable and easy to clean.
3. Equipped with an electric blower to promote mechanical convection of hot air and make the indoor temperature more uniform.
4. With over-temperature alarm device, the buzzer alarm when the thermostat is over-temperature or out of control can remind the user to cut off the power supply and troubleshoot.
5. The box door is equipped with a double-decked door structure, the outer layer is a box door, and the inner layer is a Glass door, which is convenient for observing the situation in the working room.
6. The exhaust valve or external exhaust pipe can be opened to replace the indoor air or exhaust the smoke.
Principle
The drying oven generates heat through an electric heating element, which is automatically controlled by an intelligent digital temperature controller (PID controller), which can maintain thermostatic within the set temperature range. At the same time, the box is equipped with an electric blower to force the hot air to perform mechanical convection circulation inside the studio, thus ensuring the uniformity of temperature distribution in the box and achieving efficient and uniform drying or heating effects.
Applications
Baking, drying, heat treatment, industrial heating, laboratory heating
Standards
The data did not mention specific compliance criteria
Steps
1. Place the test product to be processed on the test shelf in the studio. If the test product is large, the shelf can be removed.
2. Close the box door and observe the internal situation through the inner Glass door.
3. Turn on the power supply and set the required operating temperature through the intelligent digital temperature controller.
4. The equipment starts to heat up, and the electric blower works synchronously to promote hot air circulation.
5. During the working process, the exhaust valve can be opened or the exhaust pipe can be connected to replace the air as required.
6. After the work is completed, turn off the power supply and wait until the temperature in the box drops to a safe range before taking out the sample.
Notice
• It is not suitable for placing items with volatile substances to avoid explosion.
The side door of the control layer on the side of the equipment can be removed for use when inspecting or repairing the circuit. Non-professionals should not operate it.
• Before use, please confirm that the Power frequency is 220V, which is consistent with the equipment requirements.
• Note that the maximum operating temperature is 300 ° C, do not use over temperature.
• When the over-temperature alarm device is triggered, the power supply should be cut off in time and the fault should be eliminated.
