Overview
KOSON KS-1.5T Plant Bar Pulling Instrument is a Portable testing equipment, composed of imported light manual pump, small hollow self-resetting hydraulic cylinder, multi-function digital pressure gauge, high voltage YouTube and supporting anchors, etc., integrated into the portable case. Its digital display meter can directly read the tension value (kN), and has functions such as automatic calculation, peak holding, storage query and backlight display.
Features
The weight of the whole machine is light, only 11kg.
2. Powered by high-capacity rechargeable lithium batteries.
3, the value of 10 segment line correction, improve measurement accuracy.
4. Equipped with peak hold, automatic shutdown without operation, and LCD lighting functions.
5, using imported sealing ring, durable.
6. Ultra-low power design, Continuous Operating Time can exceed 200 hours.
7. The surface of the hydraulic cylinder is corrosion-resistant electrostatic spraying, and the piston and sliding sleeve are nickel-plated.
8. Automatic spring reset, simple structure.
Principle
The instrument generates hydraulic pressure through a manual pump, drives the piston movement of the hollow hydraulic cylinder, and applies tensile force to the measured steel bars, anchors, etc. The tensile force is converted into electrical signals by a pressure sensor, which is displayed and processed in real time by an integrated digital display instrument. Users can directly read the tensile force value. The instrument has functions such as peak holding to record the maximum tensile force value.
Applications
Used to detect the pull-out force of small steel bars, expansion bolts, chemical anchors, anchors, and on-site pull-out force testing of Glass curtain walls (test)
Standards
GB50367-2006 "concrete structure reinforcement design code", JGJ145-2013 "concrete structure after anchorage technical specification"
Steps
1. Select the appropriate anchor and adapter rod according to the tested part for assembly.
2. Connect high voltage YouTube, manual pump, hydraulic cylinder and digital display instrument.
3. Insert the assembled instrument into the measured anchor.
4. Operate the manual pump, apply the tension smoothly, and observe the real-time tension value through the digital display instrument.
5. After reaching the test requirements or peak, stop pressurizing, and the meter can maintain and record the peak.
6. Release pressure, automatically reset the hydraulic cylinder, disassemble the instrument and organize it.
Notice
• Before use, please check whether the connection of each part is firm and whether the YouTube is damaged.
Do not exceed the maximum measurement range specified by the instrument (KS-1.5T model is 0-15KN) for testing.
• Ensure that the battery is fully charged to ensure the accuracy of the test data and the normal operation of the instrument.
• Smooth pressure should be applied during the test to avoid Impact loads.
• The instrument should be cleaned and maintained after use and stored in a drying place.
• Please operate by trained professionals.
• Pay attention to the numerical units (kN) and accuracy displayed by the meter.
