Overview
KOSON KS-850 Floor Thickness Gauge is a professional measuring instrument for nondestructive detection of film thickness of concrete structures or other non-ferromagnetic media. It is mainly used for the measurement of film thickness of cast-in-place floor slabs, walls, beams, columns, wood and non-ferromagnetic materials such as Pottery and porcelain.
Features
1. Intelligent interpretation and automatic locking, digital display Film thickness value, real-time display data.
2. Automatically display the position of the transmitting Probe, and achieve fast positioning through direction indication.
3. The host and Probe adopt split design.
4. The extension rod and the Probe are designed with a flexible universal joint, which is convenient to use.
Principle
The instrument transmits signals by emitting Probe, penetrates non-ferromagnetic media (such as concrete, wood, Pottery and porcelain, etc.), receives the signal by the receiving Probe, the host intelligently interprets and automatically locks according to the signal processing results, and finally displays the measured object in digital form. Film thickness value.
Applications
Non-ferromagnetic Film thickness measurement of cast-in-place slabs, walls, beams, columns, wood and Pottery and porcelain
Standards
Code for mass acceptance of concrete structure engineering GB50204-2002
Steps
1. Place the launch Probe on the side of the object to be measured.
2. Using an extension rod with a flexible gimbal, move the receiving Probe to the other side of the object under test.
3. Observe the direction indication on the host screen to quickly locate the position of the transmitting Probe.
4. Film thickness value displayed on the screen is read after the instrument intelligently interprets and automatically locks.
Notice
• The measurement range is 40~ 1000mm, please ensure that the film thickness of the test object is within this range.
• The measurement accuracy is +/- 1mm (40mm~ 600mm) and +/- 2mm (601mm~ 1000mm).
• The operating temperature is -10 ° C~ + 40 ° C to avoid direct exposure to sunlight for a long time.
• The relative humidity of the working environment should be less than 90% RH.
• Please use it without a strong alternating electromagnetic field.
• The instrument has a built-in rechargeable battery, and the power supply time can reach 50 hours.
• Can be connected to PC via USB interface, use professional data analytics software for data processing and report generation.
