Overview
XIONGFA MDJ-300M solid-liquid dual-use Density Meter is a solid-liquid dual-use density measuring instrument. It applies the principle of Archimedes, is durable, has fine workmanship, stable performance, is simple and fast to operate, and can read density values instantly. Designed in strict accordance with national standard operating specifications, it is a good choice for quality management in various industries and laboratory specific gravity density testing.
Features
1. Directly read the density value and volume value of any shape with a density greater than one or less than a block, particle, floating body
2. Simple operation, high accuracy, Repeatability
3. Can set temperature compensation, solution compensation setting, more user-friendly operation, more in line with field operation needs
4. With RS-232C computer interface, it can be connected to a printer
5. Adopt integrated molding large sink design (length, width and height 150 * 100 * 70mm), which can measure the density of relatively large block objects
6.Density parts integrated injection molding, durable, not easy to break, the operation is more convenient
7. Configure Draft Shield for better field testing
8. One-step operation makes it easy to achieve multiple consecutive rapid tests
9. Quick measurement for any solution
10. Digital display, Measurement accuracy, easy operation, stable and durable
11. Convenient sampling, only 50ml of the tested sample
12.The measurement cup is easy to clean, not limited by the small diameter of the Specific Gravity bottle, can be used for repeability, and can also use disposable measurement cups
13. No Wechsler Balance, Specific Gravity bottling cumbersome debugging and operation
14. With RS-232C communication interface, easy to connect PC and printer, optional XF-68 printer to print measurement data
Principle
The solid model uses the Archimedes principle buoyancy method to accurately read the measured values directly. The liquid model uses the Archimedes buoyancy method and the water displacement method to quickly and directly read the liquid density value/concentration value.
Applications
Rubber, Plastic, Pipe, Plate, Wire and cable, Carbide, Polyurethane, Insulation material, Refractory material, Solid board, PE particles, New material, Solid profile, Foam material, Colloidal particles, Sponge, Foam, Ceramics, Powder metallurgy, Rock, Plastic particles, EVA material, PU foam, Plastic composite, Polymer material, Graphite material, Glass products, Flux, Colloid, Oily body, Crude oil, High viscosity, Suspension, Emulsion, Colloid density and other products
Standards
Solid mode: GB/T533, ISO2781, ASTMD297-93, DIN 53479, ASTMD792, D618, D891, ISO1183, GB/T1033, ASTM D792-00, JISK6530, ASTM D792-00, JISK6530 standards; Liquid mode: GB/T5526, 13531, 15223, 5009, JIS, ISO specifications
Steps
1. Select solid or liquid mode according to measurement needs
2. Place the sample on the measurement table or in the measurement cup
3. Start the measurement program
4. The instrument automatically calculates and displays the density value
5. The printer output data can be connected through the RS-232C interface
Notice
• Please confirm that the instrument is in a horizontal position before use
• Need to set the temperature compensation before measurement
• Solution compensation setting is required for liquid measurement
• Solid samples should be cleaned and dried
• Liquid sample sampling is approximately 50ml
• The measurement cup should be cleaned in time after use
• Avoid use in strong wind environments and use Draft Shield if necessary
• Regularly calibrate instruments to ensure Measurement accuracy
