Overview
The PUSHEN SZQ-100um Single Sided Film Applicator is a dedicated tool for laboratory Spreaders. It can Spreader 100μm thick wet-film with an application width of 100mm. The product is made of stainless steel and is rusting and corrosion resistant. It is suitable for preparing films of a specific thickness and width on a flat and solid substrate.
Features
1. Made of hard stainless steel, no rusting, good corrosion resistance
2. High Accuracy fixed film thickness to ensure Spreader Accuracy
3. The application width is 100mm and the size is 128mm.
4. Film of a specific thickness and width can be applied to a flat and solid substrate
5. Provide uniform Spreader effect to ensure sample mass
Principle
The Film Applicator uses its fixed film thickness gap (100μm) and application width (100mm) to achieve a uniform and comparable wet-film Spreader by scraping on a flat and solid substrate. This helps to evaluate the leveling of the coating, that is, the flat and smooth state of the film after construction, avoiding irregular forms such as orange peel, brush marks, corrugations, cratering, etc. Reliability of laboratory testing.
Applications
Laboratory test, Coating leveling assessment, Color test, hiding power test, Gloss test, drying time test
Steps
Step 1 Prepare a flat, solid substrate
2. Placing Film Applicators on Substrates
3. Coating evenly to form a specific thickness of wet-film
4. Assessment of film leveling and Miscellaneous properties
Notice
• Ensure that the substrate is flat and firm to avoid uneven Spreader
• Clean Applicator after use to prevent Coating residue from affecting accuracy
• Spreaders maintain uniform strength to ensure consistent film thickness
• Only for laboratory use to avoid damage caused by improper operation
