Overview
ZMD-2 High Accuracy Electronic Density Meter, also known as Electronic density/specific gravity meter, is composed of Electronic Balance with electromagnetic force equilibrating principle, special control and analysis program. It can not only measure the specific gravity (density) of various liquids, but also measure the density of solid substances, including specific gravity less than 1, floating solid substances such as foam, sponge, plastic, etc., and has a weighing function to replace Electronic Balance. The instrument has the characteristics of High Accuracy, High Linearity, High Stability and Multifunction. The structure is simple and reasonable, the performance is stable and reliable, and the operation is easy and easy to maintain.
Features
1. Adopt Professional Electromagnetic Force Sensor to ensure high data accuracy and good Repeatability.
2, a multi-purpose machine, can test solid, liquid specific gravity value, and as a thousand or one ten thousand Electronic Balance.
3. Use a large sink glass to reduce the error caused by the rising liquid in the hanging railing.
4, built-in a variety of liquid density values, convenient for users to choose flexibly.
5. It can quickly and accurately test the specific gravity/density of solid blocks, particles, films, etc. (specific gravity > 1 or < 1 can be used).
6. Liquid density test standard parts are diverse to meet the needs of viscosity and corrosion liquid testing.
7. Lower dish weighing design prevents liquid from overflowing and damaging the machine, providing more room for operation.
8, the design is simple and practical, accurate data, specific gravity/density direct reading, only two steps to directly read the data, no special training can be skilled operation.
Principle
ZMD-2 Electronic Density Meter Electronic Balance based on the principle of electromagnetic force equilibrating, combined with dedicated control and analysis programs, realizes measurement through weighing and density calculation.
Applications
Electronics, Rubber, Plastic, Wires and cables, Auto parts, Ferrite, Powder metallurgy, Food, Beverage, Flavors and fragrances, Cosmetics Non-metallic, etc
Standards
GB/T 611-2006、GB/T 1463-2005、GB/T 11540-2008、GB1666-81、GB/T 5009.2-2003、JJG 171-2004、GB1033-1986、GB4472-84、GBT-1463-2005、GB-T5526-1985、JB-T 611-2006
Steps
1. Prepare samples and instruments.
2. Carry out measurements according to the operating instructions and read the data directly.
Notice
• Power supply voltage is 220V/0.5A 50HZ.
• Check test weight and test disk status before use.
• Avoid liquid spillage to prevent damage to the machine.
• Pay attention to safety during operation and follow relevant standards.
