Overview
The NIRUN SNB-AI + 500 degree heater is a digital Viscometer for viscosity measurement at high temperatures. The instrument features intelligent measurement technology that automatically adjusts the rotational speed and has a sample chamber insulation design to reduce heat loss.
Features
1. Intelligent measurement, automatically adjust the speed, reduce the difficulty of use.
2. The sample dosage is small.
3. The sample chamber is insulated to reduce the heat loss of the sample.
4. Temperature control has low volatility.
5. Stirring of rotor rotation.
6. Optional SNB data collection software to record viscosity temperature Linear dispersion.
7. Temperature control is easy to operate.
Principle
The Viscometer uses a microcomputer control system to drive the rotor in the sample at a continuously variable speed swirl/spin. Tack resistance to the rotor is converted into an electrical signal through the beryllium bronze torque material, which is processed and displayed as a viscosity value. At the same time, the built-in RID temperature transducer and heating furnace body can precisely control the sample temperature.
Applications
Hot-melt adhesive, asphalt, paraffin, high polymer
Steps
1. Connect the power supply.
2. Install the appropriate rotor.
3. Add the sample to the sample cup.
4. Set the target temperature and speed through the control system.
5. Start the measurement, the instrument automatically runs and displays the viscosity value.
6. Optional software for data collection and drawing.
Notice
• Power frequency within the range of AC100-240V.
• Select the appropriate rotor according to the measurement range.
• Note that the sample temperature should not exceed the maximum temperature of the furnace body by 500 ° C.
• Please clean the rotor and sample cup in time after use.
• Optional software needs to be installed and configured separately.
