Overview
The RUNJIE RJ-30 anchor is a special tool for the main machine of the RJ-30 bolt drawing instrument. Each set of anchors contains multiple different specifications, covering the diameter range of φ 6 to φ 32.
Features
1. Special aircraft: specially designed for the main engine of the RJ-30 bolt puller.
2. Complete specifications: Each set contains multiple specifications, such as φ 6, φ 8, φ 10, φ 12, φ 14, φ 16, φ 18, φ 20, φ 22, φ 25, φ 28, φ 32, to meet the testing requirements of anchors of different diameters.
Principle
As a key component of the RJ-30 bolt drawing instrument, the anchor can be clamped and fixed with different diameters by connecting with the main machine, ensuring the stability and accuracy of the force value transmission during the drawing test.
Applications
Anchor drawing force test
Steps
1. According to the diameter of the bolt to be tested, select the corresponding specification anchor from the anchor set.
2. Install the selected anchors correctly on the main unit of the RJ-30 bolt puller.
3. Pass the bolt through the anchor and make a reliable clamping fixation.
4. Start the main machine of the RJ-30 bolt drawing instrument and conduct the drawing test according to the operating procedures of the main machine.
Notice
• Please ensure that the selected anchor specification exactly matches the diameter of the bolt to be tested.
When installing the anchor, ensure that it is firmly and reliably connected to the RJ-30 host.
• Please read and follow the instruction manual of the main unit of the RJ-30 bolt puller carefully before operation.
• Regularly check the abrasion of the anchor, and replace it in time if it is damaged.
