Overview
RUNJIE RJ-100 (φ 6~ φ 40) anchor is a special matching tool for the host of the RJ-50 anchor drawing instrument. Each set of anchors contains multiple different specifications, and the standard covers a total of 15 specifications from φ 6 to φ 40, and an additional φ 50 specification can be selected.
Features
1. Specially designed for the main engine of the RJ-50 bolt drawing instrument, with good compatibility.
2. The specifications are complete, and the standard configuration includes 15 kinds of specifications: φ 6, φ 8, φ 10, φ 12, φ 14, φ 16, φ 18, φ 20, φ 22, φ 25, φ 28, φ 32, φ 36, φ 38, φ 40.
3. Provide optional specifications, which can be expanded according to demand.
Principle
As a key component of the RJ-50 bolt drawing instrument, the anchor is connected with the main machine of the drawing instrument to apply and transmit tension to the anchors or steel bars of different diameters, so as to realize the test of the bearing capacity of the anchoring system.
Applications
Bolt drawing force test, construction engineering mass test, geotechnical engineering anchorage performance evaluation
Standards
The information does not mention
Steps
1. Select the anchor of the corresponding specification according to the diameter of the measured anchor or steel bar.
2. Install the selected anchor correctly on the main unit of the RJ-50 bolt puller.
3. Connect and test according to the operating procedures of the main unit of the RJ-50 bolt drawing instrument.
Notice
• Please accurately select the matching anchor specification according to the diameter of the tested part.
• Before use, make sure that the anchor is firmly connected to the RJ-50 host.
• The operation should follow the safe use specifications of the main unit of the RJ-50 bolt drawing instrument.
