Overview
YIHENG LHS-500HC-II Professional Constant Temperature and Humidity Chamber is a High Accuracy environment simulation equipment with a Temperature range of -10~ 70 ° C and a humidity control range of 40~ 95% RH. It is designed with fluorine-free environmental protection, equipped with a refrigeration system and a printer, providing stable and reliable simulation of environmental conditions for industrial research, biotechnology testing and industrial product performance evaluation.
Features
1. Adopt a new fluoride-free design for environmental protection and health.
2. Mirror stainless steel liner, four corners and half arcs are easy to clean, and the shelf spacing in the box is adjustable.
3. Microcomputer temperature and humidity controller, using TMHM equilibrate Conditioning method, stable operation, accurate and reliable temperature and humidity control.
4, Humidity Sensor, Compressor and other key components using imported products.
5. Equipped with an independent temperature limit alarm system, the temperature limit is automatically interrupted to ensure the safety of the experiment.
6. There is a 25mm diameter test hole on the left side of the box, which is convenient for experimental operation and testing.
7. Optional RS485 interface, printer and other accessories can be used to record changes in temperature and humidity parameters.
Principle
The device uses a microcomputer temperature and humidity controller and adopts the TMHM equilibrate Conditioning method to precisely control the temperature and humidity in the box. Its key components such as the refrigeration system and the imported humidity Sensor work together to ensure that the environment parameters are stable within the set range and provide the required simulation conditions for the test.
Applications
Spinning & weaving, Food processing and other aseptic tests, Stability inspection, Raw material performance testing of industrial products, Encasement testing, product life testing
Standards
The data did not mention specific compliance criteria.
Steps
The information does not provide specific operation steps.
Notice
The working environment temperature should be between 5 and 35 degrees Celsius.
• Power supply voltage is AC220V 50HZ.
• Before use, make sure the device is placed smoothly and check the power connection.
• Do not frequently open and close the box door during the experiment, so as not to affect the Temperature and Humidity Stability.
• Regularly clean the liner to keep the equipment in good working condition.
• Note that the power of the equipment is 3550W, and it is necessary to ensure the load capacity of the power supply line.
• If an alarm system is selected, ensure that it functions normally to ensure the safety of the experiment.
