Overview
YIHENG BPG-9056A precision blast drying oven is a liquid crystal display drying equipment. Temperature range is 10~ 200 ℃, Temperature resolution is 0.1 ℃, and input Power is 750W. It adopts humanized design for real-time monitoring data and operation.
Features
1. Humanized design: large screen LCD screen, multiple sets of data one screen display, menu Operating interface; Mirror stainless steel liner, four corners and half arc transition, shelf bracket can be freely loaded and unloaded, easy to clean.
2. Multi-stage programmable controller (optional): Multi-stage LCD programmable controller, a variety of parameters are displayed on one screen, which can simplify the complex test process; support multi-stage temperature, circulating wind speed, time and heating rate parameter setting and programming, preset 7 sections of 63 steps can be programmed, and each setting time is 1 to 99 hours and 59 minutes.
3. Self-diagnosis function: the LCD screen displays fault information when the fault occurs, and the running fault point is clear at a glance.
4. Convenient data processing (optional): can be connected to the printer, 485 Communication interface or USB data transfer interface, record temperature and time Linear dispersion, support data storage and playback.
5. Safety function: box wall and door thickened design, low surface temperature; independent temperature limit alarm system (optional), sound and light alarm prompt; high or low temperature and over-temperature alarm.
6. Good energy-saving design: comprehensive safety performance design to prevent high energy consumption; the use of new synthetic silicon sealing strip, effectively prevent heat loss, prolong the life of heating components, Thermal Power reduced by more than 25%.
Principle
BPG-9056A precision blast drying oven circulates hot air through the blast system to achieve uniform heating and drying. The programmable controller is used to precisely control parameters such as temperature, time and wind speed to ensure stable operation.
Applications
Laboratory, scientific research, industrial drying, material handling, sample prepative
Steps
1. Connect the power supply and turn on the device.
2. Set parameters such as temperature and time through the LCD screen.
3. Optional multi-stage programmable controller, preset program steps.
4. Start the operation and monitor the data in real time.
5. Optional data processing function, connect external devices to record Linear dispersion.
6. After running, turn off the equipment and clean the studio.
Notice
• Power supply voltage check before use meets AC 220V 50Hz requirements.
• Pay attention to the surface temperature of the box during operation to avoid burns.
• Check the alarm information of the LCD screen in time when it malfunctions.
• Regularly clean the studio to ensure safe loading and unloading of shelf brackets.
• Optional functions require additional configuration, such as multi-stage programmable controller, independent temperature limit alarm system, etc.
• Avoid over-temperature operation to prevent accidents.
