Overview
The KOSON KS-10T (φ 6-φ 18) anchor is an anchor set specially equipped with the KS-10T anchor drawing instrument, including seven different specifications of the anchor: φ 6, φ 8, φ 10, φ 12, φ 14, φ 16, and φ 18.
Features
1. Specially designed for KS-10T bolt puller, with good compatibility.
2. The set comes in seven different sizes (φ 6 to φ 18), covering the commonly used diameter range.
Principle
As a key component of the KS-10T bolt pullout instrument, the anchor can be clamped and fixed with different diameters by cooperating with the pullout instrument for the purpose of drawing force testing.
Applications
Anchor drawing force test
Steps
1. According to the diameter of the bolt to be measured, select the anchor of the corresponding specification.
2. Install the selected anchors correctly on the KS-10T bolt puller.
3. Pass the bolt through the anchor and fix it.
4. Start the puller for testing.
Notice
• Before use, please confirm that the anchor specification matches the diameter of the bolt to be tested.
• Ensure that the anchor and puller are firmly installed to avoid loosening during the test.
• Regularly check the anchor abrasion, if any damage should be replaced in time.
• Please operate in strict accordance with the operating procedures of the matching drawing instrument.
