Overview
The KOSON KS-20T (φ 6-25) anchor is an anchor set specially equipped with the KS-20T anchor puller, including φ 6, φ 8, φ 10, φ 12, φ 14, φ 16, φ 18, φ 20, φ 22, and φ 25 anchors of ten different specifications.
Features
1. Specially designed for KS-20T bolt drawing instrument.
2. The set contains ten different specifications, covering the diameter range of φ 6 to φ 25.
Principle
The anchor set is used in conjunction with the KS-20T bolt puller to clamp bolts of different diameters through the anchors, so that the puller can apply tension to the bolts to test their anchoring performance.
Applications
Anchor pull test
Steps
1. According to the diameter of the bolt to be tested, select the anchor of the corresponding specification from the set.
2. Install the selected anchor onto the KS-20T bolt puller.
3. Use the anchor to clamp the bolt to be tested.
4. Operate the drawing instrument for drawing test.
Notice
• Please ensure that the selected anchor specification exactly matches the bolt diameter.
• Please check the status of the anchor and drawing instrument before use to ensure no damage.
• Operate in accordance with relevant safety regulations.
• This product is a special accessory for KS-20T bolt puller, please do not mix with Miscellaneous type equipment.
