Overview
The KOSON KS-30T (φ 6-32) anchor is an anchor set specially designed to be used with the KS-30T anchor puller. The set includes twelve different specifications of anchors: φ 6, φ 8, φ 10, φ 12, φ 14, φ 16, φ 18, φ 20, φ 22, φ 25, φ 28, and φ 32.
Features
1. Specially equipped with KS-30T bolt puller.
2. The set contains twelve different specifications, covering the diameter range of φ 6 to φ 32.
Principle
The anchor set is used in conjunction with the KS-30T bolt pullout instrument. The anchors of different diameters are clamped through the anchors, and the pulling force is applied by the bolt pullout instrument to realize the test of the anchor anchoring performance.
Applications
Bolt anchoring force test
Steps
1. According to the diameter of the bolt to be measured, select the anchor of the corresponding specification.
2. Install the selected anchors correctly on the KS-30T bolt puller.
3. Use the anchor to clamp the bolt to be tested.
4. Operate the KS-30T bolt drawing instrument for drawing test.
Notice
• Before use, please confirm that the anchor specification matches the diameter of the bolt to be tested.
• Ensure that the anchors and KS-30T drawing instrument are firmly and reliably installed.
• Follow relevant safety procedures and instrument instructions when operating.
