Overview
LANDTEK Digital Display Force Gauge FM-207-2K is a small, simple and multi-functional High Accuracy Thrust and Tension Testing Instrument, which is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire equipment, pen making, lock making, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. Push-pull load, insertion force test, Destructiveness test, etc.
Features
1. High Accuracy and resolution
2. Numbers are displayed, ignoring the difference
3. Four measurement units of N (newton), kg (kilogram), lb (pound), g (gram) are available and converted to each other
4. Peak hold function, keep peak display until manually cleared
5. Data storage function, capable of storing 99 test values
6. Data output function, data can be input into the computer through data cable or Bluetooth for various analysis
7. Green and environmentally friendly, it can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually.
8. Can be powered by alkaline battery; can also be connected to 6V DC power supply
9. Adopt RS-232 data cable output and connect to PC
10. Provide Bluetooth Bluetooth data output selection
Principle
The Force Gauge uses a built-in Sensor to detect thrust or pull, convert mechanical forces into electrical signals, process them and display them digitally on the LCD screen, with peak hold, Data storage and output capabilities.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Standards
Precision: 0.2 grade
Steps
1. Install the battery or connect the 6V DC power supply
2. Select the desired measurement unit (N, kg, lb, g)
3. Perform a thrust or pull test
4. Read peak or instantaneous value display
5. Can be manually cleared or wait for automatic shutdown
6. Data analysis by connecting the computer via data cable or Bluetooth
Notice
* The working environment should be free of source and corrosion medium
* Operating temperature range is 0~ 40 ℃
* Allowable relative humidity should be less than 80%
* Allowable load is 150% F.s, there is a beep alarm when it exceeds 110% F.s
* Avoid exceeding the maximum Measured value 19.6N
Pay attention to the battery level or power connection status
