Overview
LANDTEK FM-207-100K Portable Force Gauge is a small, simple and multi-functional high Accuracy thrust and tension testing instrument, which is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire equipment, pen making, lock making, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. Push-pull load, plug force test, Destructiveness test, etc.
Features
1. High Accuracy and resolution
2. Numbers are displayed, ignoring the difference
3. Three measurement units of N (newton), kg (kilogram), and lb (pound) are available and can be converted to each other
4. Peak hold function, keep peak display until manually cleared
5. Data storage function, capable of storing 99 test values
6. Data output function, data can be input into the computer through data cable or Bluetooth for various analysis
7. Green and environmentally friendly, it can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually.
8. Can be powered by alkaline battery; can also be connected to 6V DC power supply
9. Adopt RS-232 data cable output and connect to PC
10. Provide Bluetooth Bluetooth data output selection
Principle
The Force Gauge converts mechanical signals into electrical signals through Sensor measurement of thrust or tensile loads, and displays measurement results on a large four-digit LCD screen after processing, supporting peak hold and Data storage functions.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Steps
1. Install the battery or connect the 6V DC power supply
2. Select Measurement unit (N, kg or lb)
3. Perform a thrust or pull test
4. Measured values read on the display
5. Use the peak hold function to record the maximum value
6. Manually clear or wait for automatic shutdown
Notice
* Avoid exceeding 150% of the rated load, and there will be a beep alarm when it exceeds 110%
* Working environment should be free of source and corrosion medium
* Operating temperature range 0~ 40 ℃
* relative humidity should be less than 80%
* Shut down in time after use or wait for automatic shutdown to save power
